Looking for right angle molding to seal tD

[scaramoche]

Hi all,

Im starting a new build tomorrow(once i finish cleaning out the garage). With this one im not doing the "woody" finish instead im going to use

The basic construction will be 3/4" plywood for sides, and deck. I plan on covering roof with FRP and the sides with Polywall panel. My question is i would like a flexable, cheap material to enclose the poly and frp where they join.

I have hunted at lowes and homedepot, but cant seem to find anything that is flexable, that i can glue/nail/cock at the joining seem.

what are your ideas?

[Woodbutcher]

Check out the top of the forum where there is "Rich's List". Also RV and trailer repair places are good spots also. You might post where you live. People in your area may be able to direct you to some place close as shipping of this stuff is very high.

[planovet]

Also RV and trailer repair places are good spots also.

+1

A RV place close to me has a plethora of different trim in stock and will cut to size. Look around near you and you might find the same.