Case Fans

Anything electric, AC or DC

Case Fans

Postby Shadow Catcher » Mon Jul 05, 2010 3:42 pm

I am in the process of either finding or building an air filter/purifier and in the process of looking for fans should I build my own, looked in my favorites and realized that there are case fans and there are CASE FANS, up to 360mm 14.17" 21Db 126CFM .50A http://www.coolerguys.com/360sf.html
In this case a potentiometer to vary fan speed would not carry too high a price in lost current.
There are of course smaller fans and since I have the 120mm three speeds will continue to use them.
User avatar
Shadow Catcher
Donating Member
 
Posts: 6008
Images: 234
Joined: Sat Apr 11, 2009 8:26 pm
Location: Metamora, OH

Postby Trackstriper » Sun Jul 25, 2010 6:55 pm

I think you'd find that you will need to go with a blower type fan that will handle the higher static pressure required to move air through a fairly tight filter. Maybe something like this from eBay:

http://cgi.ebay.com/1-x-Brushless-DC-Cooling-Blower-Fan-9733S-12V-0-2-0-5A-/180390841081?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2a0021caf9

If this goes away then look up "12v blower fan" on eBay.

You could use a 3M Filtrete filter from Home Depot or Lowes and that would clean some of the stuff from the air, they make them somewhat small. Or poke around your local Wally World and you can usually come up with a replacement HEPA filter for some air cleaner at a reasonable price, I've seen some round Honeywell HEPA filters fairly cheap....they would last a long time in a tear. All you need to do is make a box or baffle and mount the blower to move the air. High air volume is not going to be required. We have a fairly nice portable air cleaner in our apartment and I think it moves maybe 100cfm in the mid-speed that we run it at. But that's for a whole apartment. There's not a lot of air to clean in a TD.

I will probably do the same for our cargo conversion.
User avatar
Trackstriper
Gold Donating Member
 
Posts: 404
Images: 38
Joined: Fri Jan 26, 2007 6:05 pm
Location: Asheville, NC

Postby Corwin C » Sun Jul 25, 2010 8:17 pm

They do make filters for case fans ... most of which can be rinsed in warm water and re-used. If you're looking for more filtration, perhaps a HEPA filter for a vacuum cleaner could be adapted. In my experience, most case fans are quite powerful and shouldn't have any problems with the reduced flow (your experience may vary.)
Corwin
Image Image Image
If I am unwilling to stand up straight before the world and admit what I have accomplished during the day, without excuses, in complete and honest detail, then I can do better ...
and no one should be expected to accept anything less.
-- myself
User avatar
Corwin C
500 Club
 
Posts: 916
Images: 78
Joined: Mon Oct 19, 2009 10:27 am
Location: Junction, Piute County, UT
Top

Postby Shadow Catcher » Sun Jul 25, 2010 8:44 pm

What I have been thinking of is a combination of charcoal and HEPA to filter out smoke. I had great difficulty last year at Chain O Lakes with smog/smoldering camp fires. It was worse than LA many years back at its worst. I have looked at the Honeywell et, el, replacement filters.
We still do not have the trailer yet and until I have an idea of the flow from AC ducts (4") I will not know what exactly I need to do.
User avatar
Shadow Catcher
Donating Member
 
Posts: 6008
Images: 234
Joined: Sat Apr 11, 2009 8:26 pm
Location: Metamora, OH
Top


Return to Electrical Secrets

Who is online

Users browsing this forum: No registered users and 1 guest