Anyone willing to help me with 3d model

[AJP]

Ok here is what I am doing I currently am in the planning stages of a simple TD on a Harbor Freight 4x8 trailer. I have some scaled pdf's and cad (dxf) 2d files and would like a 3d rendering made. I have tried using sketchup and so far it is beyond my abilities. So anyone willing to help please do.

CAD files:
http://www.angib.pwp.blueyonder.co.uk/t ... mp-dxf.zip

PDF:
http://www.angib.pwp.blueyonder.co.uk/t ... rimple.pdf

Expanded galley drawings I did (note each block = 2 inches)
(CLICK TO ENLARGE)

[AJP]

I have done some playing in sketchup and have a decent start I think. Can someone tell me how it looks so far? I started on the harbor freight 4x8 trailer in the 3d warehouse and have been building from there.



Sketchup files
http://www.mediafire.com/?1d1or4pbw0kdoyx

[pebo]

Looks like your are off to a fine start. I did not look at your 2d drawings but here is your model with the ends filled in for you.

[pebo]

Here it is with the galley in place.

[AJP]

any chance you could post the sketchup files

[pebo]

Here you go...

http://www.mediafire.com/?x7eivb1iih15c2f

[pebo]

You may have touble at first working with my sketch up file until you get the hang of what I have done. The parts are drawn individualy then grouped and moved to seperate layers so that you can take the camper apart and put it back together one layer at a time just as you would if building it. If you have any questions just ask.

[pebo]

Here it is with the doors...

http://www.mediafire.com/?z6bkeqpwla4cw6h

[AJP]

You may have touble at first working with my sketch up file until you get the hang of what I have done. The parts are drawn individualy then grouped and moved to seperate layers so that you can take the camper apart and put it back together one layer at a time just as you would if building it. If you have any questions just ask.

Thanks I will play with it more later.