Teardrops n Tiny Travel Trailers

by **doug hodder** » Thu Jan 12, 2006 3:15 am

On my first tear...I made it 3'....thought I'd go longer on #2 so that I can add a vintage Honda trail 90 if I find one...but in the mean time...I can pile a lot of crap on the tongue and it does back easier...if you're using angle iron to run back under the frame...just keep it back from the hitch...that way you can always cut the tongue shorter if you don't want the "Gene Simmons" look..it's always a lot easier to cut it back rather than add on...just my opinion.....doug

by **bledsoe3** » Thu Jan 12, 2006 3:32 am

doug hodder wrote: the "Gene Simmons" look

Doug, For your next evolution are going to paint your face? :lol:

by **Arne** » Thu Jan 12, 2006 7:57 am

My ball mount stuck out a long way, about 2 inches too far. That made it rattle a lot when the trailer moved around. I shoved the ball mount all the way into the receiver, marked it and drilled a new hole in it... so now the leverage the trailer has on the ball mount is lessened and some of the rattling is gone...

by **gman** » Fri Jan 13, 2006 8:43 pm

Wife says it may be too long.

by **weasel** » Sat Jan 14, 2006 8:53 pm

Goin' 4 foot on mine

by **bledsoe3** » Sun Jan 15, 2006 3:46 am

gman wrote:Wife says it may be too long.

You stud!!!! :rofl:

by **gman** » Sun Jan 15, 2006 12:17 pm

weasel wrote:Goin' 4 foot on mine

Now Who's a stud?:laughter:

Teardrops n Tiny Travel Trailers

Is 3 ft. long enough for the tongue

Who is online