I made my own as we haven't had a great choice at the right money over here.
This is a little faint, but I hope you can see whats going on
Next job was to cut the shape out, and transfer it to the celotex
I cut the shapes out using the band saw, and removed all the foil. I've used wooden skewers to hold the two pieces together.
I transfered a few lines onto the blanks to give a guide as to where to sand them into shape.
Using course sand paper, and a carving knife, It didn't take too long to get the desired shape.
Then it was just a case of making a mirror image for the second one.
I think they're ready for resin.
It took a couple of hours to get the two layers of mat made up on the mudguards.
After sanding off the high spots , they got a layer for black gelcoat added. Then easy fill body filler, then sanding and more sanding.
Well worth the £20 and a couple of days work.....