The new table top dutch oven stand !.....
The round 500 series satellite dishs would not fit the walkers I had purchased so I decided to try another avenue with them.
installed 3 legs 120 degrees apart using $2.79 worth of carriage bolts nuts and 2" fender washers.
Table is very stout and stable ( I was a bit surprised by the strength)
The carriage bolts were 3/8 diameter by 3 1/2" long
There is about an 1 1/2" clearance under the dish which should prevent any damage to a site picnic table.
I have 3-4 of the larger oval dishs coming soon and have 1 extra walker and hope to pick up 2 more walkers
this weekend that I have found on Craigs list for $9 - $10 each.