Well I started today

Anything to do with mechanical, construction etc

Postby Spadinator » Sun Feb 05, 2006 1:46 pm

Here's the Utah law I pulled from another thread.


Here is the Utah code that regulates registration. This is the section for exemptions from registration.

41-1a-202. Definitions -- Vehicles exempt from registration -- Registration of vehicles after establishing residency

(2) Registration under this chapter is not required for any:


(h) trailer of 750 pounds or less unladen weight and not designed, used, and maintained for hire for the transportation of property or person

these are ofcourse excerpts from the whole code!!!

the only exception to this is a tandem axle trailer, all tandems have to be registered regardless of unladen weight.
_________________
Never do anything you don't want to explain to the paramedics.
User avatar
Spadinator
500 Club
 
Posts: 500
Images: 47
Joined: Thu Oct 06, 2005 11:35 am
Location: Westpoint Utah

Postby Spadinator » Sun Feb 05, 2006 3:34 pm

This is all I got done today....the cabinets are all cut pine.
Image

this is my cabinet material. the wide plank in the middle will be my counter top. It is laminated pine.

Image

Got a late invite to a Superbowl party so I'm done for today!!! :cry:
Never do anything you don't want to explain to the paramedics.
User avatar
Spadinator
500 Club
 
Posts: 500
Images: 47
Joined: Thu Oct 06, 2005 11:35 am
Location: Westpoint Utah

Postby toypusher » Sun Feb 05, 2006 3:36 pm

Spadinator wrote:This is all I got done today....the cabinets are all cut pine.
Image



How did you get that stuff to hang on the wall like that??? :)
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby Nitetimes » Sun Feb 05, 2006 3:40 pm

toypusher wrote:
How did you get that stuff to hang on the wall like that??? :)


That was my first thought too. Looks like he has the frame clamped to the wall.

8) 8)
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

Postby UTDRob » Sun Feb 05, 2006 4:00 pm

Wow man, that's a lot of progress! Good Job! You are an inspiration.
User avatar
UTDRob
Teardrop Builder
 
Posts: 48
Images: 19
Joined: Tue Jan 31, 2006 10:53 am
Location: Aubrey TX
Top

Postby Ira » Sun Feb 05, 2006 4:17 pm

Okay..Spad. I'm gonna go out on a limb here:

I refuse to believe you did your frame/deck...cut your side walls out...cut your door openings out...placed your sides up...and have a spar or two to hold them up to boot...in one day.

I simply don't believe this is possible.

YOU BASTARD!!!

But I don't believe this was all done in one day with you and a helper. Maybe FIVE helpers, but not one.
Here we go again!
User avatar
Ira
Forum Storyteller
 
Posts: 5652
Images: 118
Joined: Tue Nov 29, 2005 2:16 pm
Location: South Florida
Top

Postby Spadinator » Sun Feb 05, 2006 4:35 pm

Ira wrote:Okay..Spad. I'm gonna go out on a limb here:

I refuse to believe you did your frame/deck...cut your side walls out...cut your door openings out...placed your sides up...and have a spar or two to hold them up to boot...in one day.

I simply don't believe this is possible.

YOU BASTARD!!!

But I don't believe this was all done in one day with you and a helper. Maybe FIVE helpers, but not one.



Thats OK Ira......It did happen in one day although I did have help (wife)standing the walls...sealing the underside of the floor and putting the floor on the trailer. My wife did do a great job of keeping my two little helpers (my 5 and 7 year old) busy so I could work.

8)

I guess I should add that I studied the plans through and through so that I had a plan in place.....I also made a punch list of what needed to be done and what material I needed to accomplish that!!!!

;)
Never do anything you don't want to explain to the paramedics.
User avatar
Spadinator
500 Club
 
Posts: 500
Images: 47
Joined: Thu Oct 06, 2005 11:35 am
Location: Westpoint Utah
Top

Postby PaulC » Sun Feb 05, 2006 5:16 pm

toypusher wrote:
Spadinator wrote:This is all I got done today....the cabinets are all cut pine.
Image



How did you get that stuff to hang on the wall like that??? :)


:rofl: :rofl2: :lol: :laughter: :crying1: :rofl2:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby bledsoe3 » Mon Feb 06, 2006 1:05 am

Spadinator wrote:Jealous are ya bledsoe!!!! :lol:

Uh, well.... :oops:
If you do what you've always done, you'll get what you've always got.
User avatar
bledsoe3
3000 Club
3000 Club
 
Posts: 3694
Images: 112
Joined: Tue Jun 07, 2005 5:55 am
Location: Oregon, Portland
Top

Postby madjack » Mon Feb 06, 2006 1:28 am

toypusher wrote:
Spadinator wrote:This is all I got done today....the cabinets are all cut pine.
Image



How did you get that stuff to hang on the wall like that??? :)


...why sky hooks of course... available here .............................. 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby toypusher » Mon Feb 06, 2006 5:40 am

:lol:
User avatar
toypusher
Site Admin
 
Posts: 43040
Images: 324
Joined: Fri Jan 28, 2005 12:21 pm
Location: York, PA Area
Top

Postby PaulC » Mon Feb 06, 2006 7:12 am

MJ, Now I've seen it all :? My life is complete :crazy:
Cheers
Paul :thumbsup:

TRIVIA: Skyhooks--Australian rock band from the 70's. Frontman was a bloke by the name of Shirley Strachan. Had a string of hits including: "Living in the 70's" and "You just like me 'cause I'm good in bed." :M
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby Ira » Mon Feb 06, 2006 9:11 am

It's been 24 hours.

Spad has probably finished and is at the DMV getting registered.

Unbelievable.
Here we go again!
User avatar
Ira
Forum Storyteller
 
Posts: 5652
Images: 118
Joined: Tue Nov 29, 2005 2:16 pm
Location: South Florida
Top

Postby Spadinator » Mon Feb 06, 2006 9:26 am

Ira wrote:It's been 24 hours.

Spad has probably finished and is at the DMV getting registered.

Unbelievable.


Would have been but the FLux Capacitors in my Batallion of construction robots ran low on blinker fluid and prop wash. New shipment coming in for the Battlestar Gallactica today.
Never do anything you don't want to explain to the paramedics.
User avatar
Spadinator
500 Club
 
Posts: 500
Images: 47
Joined: Thu Oct 06, 2005 11:35 am
Location: Westpoint Utah
Top

Postby Ira » Mon Feb 06, 2006 9:41 am

Chief Engineer Miles O'Brien would have simply rerouted fluid from the lifts or the Holodeck.

Or done a saucer separation.
Here we go again!
User avatar
Ira
Forum Storyteller
 
Posts: 5652
Images: 118
Joined: Tue Nov 29, 2005 2:16 pm
Location: South Florida
Top

PreviousNext

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: Bing [Bot] and 5 guests