Moderator: eaglesdare
Wolffarmer wrote:Cool beans Eagle
Does look like a foamy will need plenty of ventilation for warmer weather and lots of warm bodies in it. While the heat keeping abilities sound like a liability in warm weather might actually be a plus. If kept sealed up in the heat might not warm up as much. And once the sun goes down the fact that there is less mass could cool off inside quicker, with ventilation of course.
Congrates on the maiden voyage. Lots of people was watching your back
Randy
Wolffarmer wrote:In my more conventional 4X8 TD I have slept solo to 12 degrees and was comfortable. Well it was about 50 inside but that is pretty normal for me in the winter at home. I would imagine yours should be much better insulated than mine. I have 1 inch in the walls and about 1.5 in the top. No top vent, a pretty good sized mulitpane window and home made door.
Randy
GPW wrote:Hmmm... for me 70F is Cold !!!So you already have an AC ...
Weird that wood broke like that ...![]()
EAGLE , I'd just like to say a Big THANKS , for trusting me on this ... The plan was for me to test it out so the blame would be all on me ...But you did a SUPER job , and I'm sure the TD will provide many many years of camping enjoyment for you and your family ... !!!
![]()
![]()
![]()
![]()
A Big WELL DONE !!!
Miriam C. wrote:The foamy is a great idea, executed very well..
I do hope you will consider a build thread if you can reconstruct the pictures. You have done such a great job..
GPW wrote:Eagle ... That , and the fact this thread has become TOO LONG for most folks to read... Took a "while" to get to the build...![]()
The honor is all yours !!! So if you'd be so good as to start a build thread that would be terrific ... I'm sure folks are long tired of listening to me and my strange ideas babble on and on ...
`CARS wrote:Great job Eagle. Glad you and the "Foamy" had a great, safe trip even if it was a little "damp".
phpBB forums must not have the ability to copy one post. Other forums I am on are Vbulletin and each post is numbered. You can click and copy that number and paste it to another thread.
It will take some time, but a build thread IS in order!! You did a great job.
Users browsing this forum: No registered users and 10 guests