It's Happening

Lets talk tiny houses, tumbleweeds etc on wheels

Postby droid_ca » Sun May 29, 2011 9:07 pm

one of the designs I have in pencil Cad i did a stair well that functions as a room divider cause I put in a landing and then roatated the stairs 45 degrees would something like that workout for you
There is a world, just beyond now,
where reality runs a razor thin seam between fact and possibility;

Anywhere I roam where I lay my head is home....
Image
“Fide Canem”
Please check out my build thread
viewtopic.php?f=5&t=52816
User avatar
droid_ca
Donating Member
 
Posts: 1981
Images: 176
Joined: Thu Sep 30, 2010 5:08 am
Location: Prince George BC Canada

Roof time

Postby Sandy St. Louis » Sun May 29, 2011 11:06 pm

This next set of pictures show the roof being built . The rafters are installed with a selection of 3 and 4inch #8 screws along with hurricane ties . The roof sheeting 7/16 osb glued and stapled . The corrigated roofing is screwed over 35lb felt. Extra screws were installed on the leading edge of the corrigated roofing. Sandy
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada

rafters cut and ready

Postby Sandy St. Louis » Sun May 29, 2011 11:15 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

starting to look like a roof

Postby Sandy St. Louis » Sun May 29, 2011 11:17 pm

[img][img]http://www.tnttt.com/gallery/image.php?image_id=79305[/img][/img]
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

now the hard ones no loft

Postby Sandy St. Louis » Sun May 29, 2011 11:23 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

rafters up installing gable ends and facia

Postby Sandy St. Louis » Sun May 29, 2011 11:25 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

a poor picture of the hurricane ties

Postby Sandy St. Louis » Sun May 29, 2011 11:27 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

the osb is installed roof is tarped for the night

Postby Sandy St. Louis » Sun May 29, 2011 11:30 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

Postby droid_ca » Sun May 29, 2011 11:31 pm

what is your ceiling height on the mainfloor and the loft
There is a world, just beyond now,
where reality runs a razor thin seam between fact and possibility;

Anywhere I roam where I lay my head is home....
Image
“Fide Canem”
Please check out my build thread
viewtopic.php?f=5&t=52816
User avatar
droid_ca
Donating Member
 
Posts: 1981
Images: 176
Joined: Thu Sep 30, 2010 5:08 am
Location: Prince George BC Canada
Top

the felt and flashing installed

Postby Sandy St. Louis » Sun May 29, 2011 11:32 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

corrigated on less roof cap

Postby Sandy St. Louis » Sun May 29, 2011 11:35 pm

Image
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

cieling hieght

Postby Sandy St. Louis » Sun May 29, 2011 11:40 pm

Droid , the floor to loft hieght is 6ft 4.5 inches will loose some of this with the flooring. A stair case using a landing is a good thought a closet under the landing can also work Thanks Sandy
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

Postby droid_ca » Mon May 30, 2011 12:03 am

my idea for the wall side of the staircase would be a bookshelf and then storage on the other side or possibly a bathroom under the stairs I really like your progress that your making I'd love to see it one day ....... maybe at a gathering :thumbsup: :applause: :applause: :applause:
There is a world, just beyond now,
where reality runs a razor thin seam between fact and possibility;

Anywhere I roam where I lay my head is home....
Image
“Fide Canem”
Please check out my build thread
viewtopic.php?f=5&t=52816
User avatar
droid_ca
Donating Member
 
Posts: 1981
Images: 176
Joined: Thu Sep 30, 2010 5:08 am
Location: Prince George BC Canada
Top

RE: Stairs

Postby mezmo » Mon May 30, 2011 12:41 am

Hi S St. L,

Another possibility for interior stairs are "ship ladder stairs", with
alternating half treads. They allow for a very steep angle but large foot
support and a very small footprint.

You could even build it as two very narrow [looking at the stair treads
head-on] Japanese style stair chests side by side with their heights offset
to give the alternating half tread effect. You could then build in small
drawers of the varying depths of the tread face to the "back" of the ship
ladder stairs for storage to fit under all the treads. It' be a perfect combo
of storage and staircase with no wasted space.

Just use Google Images and put in "alternating tread stair". Ignore any
"thick" straight ladder style with the handrails - those are just a version
of a regular ladder. Look at the alternating tread designs for inspiration.

Cheers,
Norm/mezmo
If you have a house - you have a hobby.
User avatar
mezmo
1000 Club
1000 Club
 
Posts: 1817
Images: 194
Joined: Fri Jan 01, 2010 4:11 am
Location: Columbia, SC
Top

Stairs

Postby Sandy St. Louis » Mon May 30, 2011 11:16 pm

Thankyou very much Norm getting a handle on a safe and practical way of accessing the loft will determin the whole interior layout
Sandy St. Louis
Teardrop Advisor
 
Posts: 75
Images: 64
Joined: Sat Nov 15, 2008 10:46 am
Location: Parksville B.C. Canada
Top

PreviousNext

Return to Tiny Houses on wheels

Who is online

Users browsing this forum: No registered users and 3 guests