1. repack wheel bearings
2. balance both wheels
3. check tire inflation
4. install removable tongue
5. connect hitch to reciever ball
6. adjust load to reduce tongue weight
7. load TD spare tire and wheel
8. bring stabilizer jack stands
9. bring hydrolic jack to remove hitch from ball
10. load wood blocks to level teardrop when parked.
Oh, never mind all of that stuff, I'm bringing the "wheel-less" 3x3 TD... Wheels, Wheels, I don't need no stinking wheels, for this shake-down tour fresh out of the workshop. See you there. (At last I have a TD painted to match my hauler)




