Harbor Freight HVLP options?

[doug hodder]

Get an inline air dryer, and I would recommend a pressure gauge, small one right at the gun...along with a small disposable final water filter..you may have enough pressure 25 feet down the line, but without a gauge at the gun...you won't know exactly what you have..you will lose pressure in the line...and make sure you drain a tank regularly on a compressor...you will be surprised just how much water you can get out of one....just my thoughts ...Doug

[greasywheats]

Thanks guys- I think I am going to go with the HF #90234-1VGA air compressor (Central Pnuematic 3 HP, 10 gallon); HF # 90977-oRNH 20 oz. gravity feed HVLP spray gun (with small air regulator); 25 ft hose; and HF #42035-2RNH Air filter/regulator to attach at the tank. Did I miss anything! Hopefully this setup will give me what I need to spray the TD reasonably well, finish my bookcases and power my yet-to-be purchased small nailers. Thanks for all the input!

[greasywheats]

Thanks for the tip Jim...where do i get the 20% coupon from?
Thanks!

[madjack]

...here ya go http://ww2.harborfreightusa.com/showpag ... 202&email=
madjack
p.s. it is good till the 25th so hurry

[Jim Marshall]

Greasy, I deleted the e-mail they sent to me with the coupon. If you sign up to get their e-mail they will send you one. I did a search and can not find it on their regular site. I am sorry buddy.

[Jim Marshall]

Jack, you do have a crystal ball. Thanks for posting the link.