My cargo trailer has Glo-Brite tail / turn signal / brake lights. They work just find. However, as I move along in my conversion I took the light out just so I would know how to replace the lamp if needed. The complete lens package is held in by a rubber gasket and seems to work very well, the issue is there does not seem to be a way to take the red lens off the body of the light to get to the bulb. I don't want to apply too much pressure or use a tool and crack the thing. Any experience or suggestion? The way it looks when a bulb needs to be replace I would have to replace the whole thing. Thanks!
Dan
PS they are 6" X 2"