I'm starting to plan my walls and am starting to look at my electrics. My wall thickness will be 1/2" outer, 1" Maple and Oak Spars and 1/8" Oak Plywood inside (1-3/8"). What electrical switches (110V), Outlets (110V), switches (12V) do you use in your builds? Do you also use enclosures for your switches and outlets as you would in a house?
I also ordered my Fantastic Fan 6000 rbta. I went with this model as it was not a lot more, so I got all the features.
I've seen several wire routings through the wall, such as, drilled holes through spars, drilled holes with pvc through the spars.
What is the best technique to route the wires ( 14ga romex for 110V and and 16ga for 12V) through the spars and still maintain the strength and integrity of the spars?
Thanks!