Side Profiles?

[Dragonryder]

Here is my teardrop on steroids. People ask me why the sides are so tall. My wife wanted cabinets on the front and back walls and to be able to fit a bunk bed for our grand daughter. This design afforded me enough room inside to do that. I went with the straight back design to allow for a little more room in the galley and on the inside back wall. I know, this must be confusing but it works.

[Grid Runner Adventures]

Here is a rendering of what I am working on currently.

[vomadude]

Here's mine on it's first trip.

[PhotoGuy]

Just went through the Gallery Sticky.... You guys have some awsome galleries. Could someone start a sticky for trailer side profiles? I think that would be really interesting to Newby and Wannabe builders... I don't have the computer knowhow to set it up, but maybe someone else willing to take the challenge?

Great idea. Would help me make up my mind of the side profile that I want to use

Thanks

[nevadatear]

Little late to the game, but here is MONSTERO

[jackdaw]

Here's our number three.

It's based on the Grumman2 , but I've lost the flat spot above the door, and given it a little extra curve on the rear end.



Here's our first one for a comparison, I think this one is as Andrew drew it in the design library.

[eamarquardt]

Here's our number three.

It's based on the Grumman2 , but I've lost the flat spot above the door, and given it a little extra curve on the rear end.

I love your profile and am going to "aim" for something like it. Mine will be 11 feet long by 4 feet high so I may have to make some "adjustments" though.

Good job.

Cheers,

Gus

[jackdaw]

Here's our latest trolley top ...Wanda...



It's a 5 wide modernistic 8ft long...with a trolley top

[bobhenry]

sometimes you just never know where your next teardrop profile idea may come from.......

[Corwin C]

sometimes you just never know where your next teardrop profile idea may come from.......

Now that's a nice uncanned ham ....

[Oldragbaggers]

Now that's a nice uncanned ham ....

[bobhenry]

OH ! Here is the canned ham design..........

[Kermit]

Angib drafted up a profile I cobbled together after looking at Eric's standie. Here's the link over to that thread, since I don't know how to move images around. I'm better with tools.

http://tnttt.com/viewto ... c&start=75

It's 8' long, and the profile is just ove 6'4" high. No "slouchie."

[Mark72]

Hey Bob, That looks familiar!


Mark

[dano]

This is where Im at so far.