by working on it » Fri Jan 27, 2012 8:20 pm
Like Corwin C. stated above, I couldn't resist adding a comment anyway. To quote Wiki:"The first teardrops were designed around the idea of using standard 4 by 8-foot sheets of plywood"; in the 50's and early 60's I must've seen a dozen built to that size criteria (and wished to have one someday!). Any other trailer was much larger, and seemed to me as a youth, just a traveling house. Since I was a Boy Scout during that time frame, I was used to tent camping (though never used to sleeping in the mud or on rocks) and saw the TD as a special, improved,"hardtop" tent, as opposed to the "softtop" pop-ups that my neighbors had (and regretted as their canvas rotted away). Years passed, 30-35 since I last camped out, and I never thought twice about the size TD I would build...4x8. However, it wasn't until I researched here that I realized only half of the TD's I remembered were actually the curved teardrop...half were grasshopper types. Now, I had to choose traditional curves or simpler boxiness? Not a woodworker, I chose simpler. Either way, built on a similarly sized platform, I thought it would be ok with traditionalists. Now I see that it is with some, maybe not with others. So what! I am building a long-delayed vision, as are others here, so I agree that whatever "floats your boat" be accepted by the enthusiasts.
2013 HHRv "squareback/squaredrop", rugged, 4x8 TTT, 2225 lbs- *3500 lb Dexter EZ-Lube braked axle, 3000 lb.springs, active-progressive bumpstop suspension
- *27 x 8.5-14LT AT tires (x 3) *Weight Distribution system for single-beam tongue
- *100% LED's & GFCI outlets, 3x fans, AM/FM/CD/Aux. *A/C & heat, Optima AGM, inverter & charger(s)
- *extended-run, on-board, 2500w generator *Coleman dual-fuel stove & lantern, Ikea grill, vintage skillet
- *zinc/stainless front & side racks *98"L x 6" diameter rod & reel carrier tube on roof


