Cabinet hardware question.

[Forrest747]

Cabinet hardware question.

I just installed my upper cabinet doors and didnt think about what to hold them up. So what type of restraining device did you use for your cabinets. I have seen magnetic ones and ones that have the rollers that pinch. what did you use?

[Martiangod]

This is what I used, I also use them for french doors and closet doors.
Tension on the spring loaded balls is adjustable

Also see your build thread, different hinges would solve your problem

[Forrest747]

I did see that thank you

[Woodbutcher]

I use a "Bulldog Catch" on all of mine. It seems that you need a catch that really has some holding power to keep things from pushing the doors closed when traveling. They work great.

http://www.ebay.com/itm/Bull-Dog-Concea ... 3a71813aba

[absolutsnwbrdr]

Not sure what kind of holding power you need, but these little spring loaded concealed hinges from Lowe's were cheap and they snap shut very firmly.

[Forrest747]

I am think a little more than average holding power. So I plan on one on each side of the door. Zach I like that one and will look for the next time i am at lowes.

[Forrest747]

Went to Lowes last night and saw those hinges Zack put in and looked like fun but I found something that will work for me. it is a self closing simple hinge and oddly enough matched a few of the holes i already put in. I did buy some magnetic catches but we shall see how these hold up.