Coleman Keepers Campfire come on in!

[campmaster-k]

Although good in theory and sometimes handy these type of wrenches are not cut perfectly and can ruin brass fixtures.

[High Desert]

Just wanted to remind you all know that the 20th annual convention for the International Coleman Collectors Club, Inc. is coming up.

The convention is June 28-30, 2012 at Lake George, New York.

Link to more information.
http://www.internationalcolemancollecto ... eorge.html

I won't be able to attend this year.

Darren

Darren how many attend that event?

I'm not Darren, but last I heard the host said there were almost 200 members registered for this years convention

[campmaster-k]

I wish I was on the east coast.

[High Desert]

I wish I was on the east coast.

well the up side is that it moves to a new location every year Kirk. Next year it's in Tempe AZ, just down the road in comparison

[doug hodder]

Found it!!!! My wrench fell off the box behind the stove and fell behind the slide out pantry. I was robbing stuff from it for the Nomad this weekend and heard it go clank when I tried to slide back the pantry. Doug

[Maureenm]

[Kevin A]

[Wolffarmer]

Does any have experience with a rattle can clear coat? Hardness, Fuel resistance? Bake it, Don't bake it?

Randy

[starleen2]

Does any have experience with a rattle can clear coat? Hardness, Fuel resistance? Bake it, Don't bake it?

Randy

I did some clear coat to give a gloss to flat enamel for a Mongomery ward seafoam green color - I baked it and it seems to hold up well.
Valspar Clear gloss

[starleen2]

Itoday I was going through some old pictures and found this:

[Wolffarmer]

Thanks, I remember that stove.

Randy

[Maureenm]

Hey guys, any advice on how to package and send a stove across the country? I'm sending a 413E to KCStudley. I know how to pack the innards so that nothing is moving/rattling, and to drain the tank. just wondered about outer packaging and recommendations for UPS/USPS,etc.
Thanks, Maureen

[KCStudly]

Woohoo!



Standing by at the ready Maureen. PM me to work out the details on payment.

You meet the nicest kind of people here, dont-cha-know!

[wagondude]

Hey guys, any advice on how to package and send a stove across the country? I'm sending a 413E to KCStudley. I know how to pack the innards so that nothing is moving/rattling, and to drain the tank. just wondered about outer packaging and recommendations for UPS/USPS,etc.
Thanks, Maureen

I would at least run a wrap of bubble wrap around it. Blocks of styrofoam at the corners of the box to suspend it in the middle would work as well.

Bill

[campmaster-k]

I do bubble wrap on everything.