Seen this before but can't find it!!

[lonerider]

Looking for a link to a shore power inlet box. The kind that has the flip-up door on outside that has a male plug that the power cord plugs into and can be wired to the various places you want to run electric inside the trailer. Any help is appreciated!!

[Oldragbaggers]

A whole selection at this link
[url]
http://www.delcity.net/store/Power-Inle ... 4AodSkkY0g[/url]

[GuitarPhotog]

Amazon has several of the shore power inlets shown on that site for much less.

For example, the 15A Marinco inlet shown on that site is only $18.28 at Amazon.

It is worth shopping around. Boat accessories are by definition expensive when purchased at the marine store. Often much less when purchased elsewhere.

I used the Marinco 15A inlet on my teardrop. Works great. The biggest issue was finding the right size hole saw to cut through my aluminum skin.

<Chas>

[Oldragbaggers]

Amazon has several of the shore power inlets shown on that site for much less.

For example, the 15A Marinco inlet shown on that site is only $18.28 at Amazon.

It is worth shopping around. Boat accessories are by definition expensive when purchased at the marine store. Often much less when purchased elsewhere.

I used the Marinco 15A inlet on my teardrop. Works great. The biggest issue was finding the right size hole saw to cut through my aluminum skin.

<Chas>

You got that right, Chas. I used the same inlet. I went EVERYWHERE. No one sells a 1-7/8" hole saw. So I used a 1-3/4 and very carefully enlarged it with a little sanding wheel on the Dremel.

[eamarquardt]

1 7/8 hole saws: http://www.starrett.com/saws/saws-hand- ... h-bi-metal

Buy it here for about ten bucks: http://www.medfordtools.com/metalworking/holesaws.html

Hope this helps.

Cheers,

Gus

[lonerider]

Thanks Guys!!