Ok so my wife and our two kids are taking a three week road trip to the midwest (we are from Maine) and we were planning on staying in a tent on campgrounds. However, I have a 6x12 box trailer that I dont really use and I was thinking I should turn that into tent on wheels. I was amazed to see how many people have done this exact thing. So I have the trailer the shelving is already in there. I am just going to paint the inside white to brighten it up. I am going to install a vent with a fan in the ceiling, put a screen door on the side door, and set up a futon that we already have and call it good for now. The only other thing I want to do is set up a dorm refrigerator that we already have. There is a light in the trailer currently but I would like to add another one or two on 12v and then a couple regular 110 outlets.
I know the dorm refrigerator is not an ideal way to go however, we will be either hooked to the truck or shore power most of the time the only time the refrig. would need to run off battery would be if we stop and go in somewhere for dinner etc.
My question is how do I do this. I want to run the refig off the truck when we are driving, then be able to pull power from the batteries if necessary, and lastly be able to pull up and hook up 30 amp shore power. am really quite lost in the way this system would go. I can do all the practicle hooking up the system but designing the system so it works is beyond my electrical capabilities. I am kind of rushing the setup with this trailer but I want to wire it so I can continue to make improvements. Can anyone help or point me in the right direction?
The total system would be,
Trailer lights
3- 12 volt lights
3- 110 outlets (for a microwave and whatever else maybe a tv down the road)
1- dorm refrigerator
Needs to run off the truck, batteries, and shore power.
Thank you all for any help you can offer!
Ross