A question & idea.

Anything to do with mechanical, construction etc

Postby Elumia » Wed Mar 29, 2006 10:24 am

There may be more power in a 15lb cylinder, but to recharge it you have to go somewhere to have it filled. A typical coleman lantern gives you about 18 hours of light on a 1lb cylinder. Seems pretty innefficient and bulky to me. Not to mention the emmissions.

Here is an interesting article on fuel based lighting.

http://eetd.lbl.gov/Emills/PUBS/PDF/Mil ... ce_FBL.pdf
User avatar
Elumia
500 Club
 
Posts: 641
Images: 15
Joined: Tue Jan 17, 2006 2:02 am
Location: Napa, CA

Postby PaulC » Wed Mar 29, 2006 5:34 pm

Rainjer, Have a look here http://www.coleman.com/coleman/colemanc ... oryid=1045

Retro style lighting with safety
Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia

Postby rainjer » Wed Mar 29, 2006 10:44 pm

I have a similar lantern. I just don't like fluorescent lanterns. I own a large Coleman lantern and a small Coleman Xponent propane lantern. I will most likely hang them up outside while cooking.

I will still install a couple 12 volt lights in the galley. I just dont like the ones I am finding locally. I have been looking online but still haven't found anything yet. :cry:
User avatar
rainjer
King Koleman
 
Posts: 2092
Images: 11
Joined: Mon Feb 27, 2006 11:38 pm
Location: Everett, WA
Top

Postby sdtripper2 » Wed Mar 29, 2006 10:57 pm

rainjer:

Is it the type of light that you don't like with the galley lights you have been looking at or their physical design? :o
"A man who is good enough to shed his blood for his country
is good enough to be given a square deal afterwards." -------Theodore Roosevelt

Steve
User avatar
sdtripper2
Search Garoux
 
Posts: 2162
Images: 168
Joined: Mon Oct 10, 2005 1:32 am
Location: California, ... San Diego
Top

Postby rainjer » Wed Mar 29, 2006 11:24 pm

sdtripper2 wrote:rainjer:

Is it the type of light that you don't like with the galley lights you have been looking at or their physical design? :o


12 volt lighting in general. They are all cookie cutters.
User avatar
rainjer
King Koleman
 
Posts: 2092
Images: 11
Joined: Mon Feb 27, 2006 11:38 pm
Location: Everett, WA
Top

Postby PaulC » Thu Mar 30, 2006 1:24 am

Mate, Just about all on this forum who needed 12v lighting have either found or built their own(led type). The range available is absolutely amazing when you consider that it covers incandescent, halogen, fluro, led. Is it possible that you may be set in your ways and feel that the type of lighting you possess is the only way to go? If that is the case then stick with it. If you are happy with it why change? Everything about building a T&TTT is personal choice not the say so of this forum. So long as you are happy with the choices you make, who are we to knock it. The only thing we stress is safety first and foremost, from the workshop all the way through to using your trailer.
Paul
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby Sonetpro » Thu Mar 30, 2006 5:05 am

rainjer wrote:
sdtripper2 wrote:rainjer:

Is it the type of light that you don't like with the galley lights you have been looking at or their physical design? :o


12 volt lighting in general. They are all cookie cutters.


Rainjer,
look at marine lights. The quality and looks are much better.
}><)))'> ~--------------·´¯) SteveT
You don't know what the limit's are until you take it there.ImageImageImage
User avatar
Sonetpro
Site Admin
 
Posts: 2038
Images: 107
Joined: Sun Oct 30, 2005 8:11 am
Location: Plantersville, TX
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 1 guest