TRAIL-OF-TEARS wrote:mikeschn
love the plans for the little dinner. the 3-D wall section you have shows using 3/4" " sticks" and the voids will be filled with foam. My question is: Since there is very little void spaces could you just use a piece of 3/4 ply instead of the sticks and then just cut out the void spaces for the foam and weight reduction? I think I have seen this done before. Thanks a lot.
P.S. What are the dimensions for the Baja Benroy?
Sure, you could use a piece of 3/4" plywood, but realize that is only 23/32" thick. And the foamular is 3/4" thick. So you'll have to sand off 1/32" to get the foamular to fit.
The other thing to remember is that you may be screwing into the endgrain of plywood instead of the end grain of pine sticks. Mostly that just means predrilling before driving in screws...
The Baja Benroy is 10' long, 5' high and 6' wide.
Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...