door locks? who used what?

[fishfreek]

I am the stage of my build where I am hanging my door. I am looking for lock /handle suggestions. I have 3/4" thick walls on my camper and don't find much made to fit this size except screen and storm door hardware.


Thanks

[wyldesyde007]

http://www.worktruck-outfitters.com/hardware-work-trucks-door-handles-door-locks-c-21_148.html

I have used paddle handles in 3/4" material although you may find that you have to put a backer plate behind the latch though because the mortise for the lock will usually cut almost all the way through your 3/4" material.

[pohukai]

I used regular door handles from Home Depot (I think $8.00 each)

door.JPG (19.97 KiB) Viewed 2626 times

[NathanL]

RV trailer lock. I believe they adjust down to 3/4" up to 1-1/4" but you'll have to check. If they don't you can always add a spacer on the inside just larger than the lock.

[bobhenry]

You have to look thru to see the national hardware slide lock on the far door.



These are great for simple surface mounting and they have a turn knob to assure the slide is not slipped open by accident if you choose to engage it.

[S. Heisley]

I used a security screen door latch and dead bolt set, coupled with a mending plate for the dead bolt to latch onto.

[suckerpunched]

Mine are lockable from the outside....inside I use simple hook and loop screen door kinda things...and a 357 magnum....for bears and stuff.

[KCStudly]

and a 357 magnum....for bears and stuff

+1 on the .357 mag.

[grant whipp]

Depends on how fancy/elaborate or how basic/KISS you want to make it. For traditionality and reliable simplicity with both outside and inside security, it's hard to beat the simple outside locking L-Handle with lockable inside door latch: http://www.lilbear.teardrops.net/parts2 ... oorhandles

However you choose, Good Luck, and as always ...

CHEERS!