Its been tough trying to find time to work on the camper.I have been able to work on the galley and interior cabinets.


I have also been able to complete most of the wiring and the plumbing.

The hatch is about 90% done. I used the same tongue and groove knotty pine on the inside of the hatch as I used on the interior ceiling. I was a little concerned with the weight of the hatch so instead of using struts, I made adjustable pole supports. I'm going to use one of the supports as a paper towel holder.

I am down to a lot of little things before I finally get to skinning the roof and sealing the wood.