Ethel has began

[Ben]

I have to agree some great pics! I can't wait to see it in person!

[Silvrzuki77]

Nov 2-7 anytime in there for a trip.

[Silvrzuki77]

Ben how are you sheeting the roof of the trailer? I can only get aluminum in 4x10 sheets soo i guess im going to have to cut mine in half and over lap a tad in the front and do a trim piece I guess.

[Ben]

Going to run side to side and overlap the seams as much as possible and use sealant in the overlap then screw to the roof ribs

[Ben]

Look an update! I'm still working on her.

[KCStudly]

Cool! Any details to add?

[Ben]

None other than if I had to do it all over again I would of jut bought the pre made doors! These things are a pain to build!!! And I'll have more in them than the pre made doors. And on a side note I have done some improvement to the fj.

[Silvrzuki77]

Did you buy that slide out or make them? Might be ready for death valley!

[Ben]

Well I made it of coarse. Lol I'm peeping for the trip!

[Ned B]

Psst Ben... R

[Ben]

Damn I hate it when I misspell something! Lol

[S. Heisley]

None other than if I had to do it all over again I would of jut bought the pre made doors! These things are a pain to build!!! And I'll have more in them than the pre made doors. And on a side note I have done some improvement to the fj.

I like it! Thanks for the idea!

[Ben]

Well I've been working real hard! Not really but I've made some progress in the galley and finished the ac for good. The galley is coming along quite well. So here's some pics



The aluminum should be ordered within the next week or two along with the rest of the trim. So by months end I should have the outside complete I hope!

[rebapuck]

Looks nice. Will you paint or stain the galley? I'd like to see some painted cabinets . Stain is nice, but everyone is doing that.

[Ben]

I'm painting mine just for that reason. Ill keep you all I'm suspence til I get them done. It might be a while but ill get there.