Door trim/seal

[dglenn1960]

Thinking harder about my doors now (floor done and walls are up, pics forthcoming) and have been contemplating having the seal on the inside (like a house door) and using a normal piano hinge. I used 1/2" ply for the walls and can get 1/2 ply alum. edge trim which fits nicely. If I trim the walls with an alum. angle I would have the following (with one or two of the readily available rubber door seals):

<img src="http://www.glennweb.net/home/images/tear_door1.jpg">

Opinions? All edges will be sealed with epoxy (ext. is spar poly).

~dave

[gager2002]

I like the idea. But the corners will need to be square instead of rounded. Or can you do it another way?

[dglenn1960]

Forgot to add that, yes I'm doing square doors on the moto-tear. You could bend the alum for the door trim but wouldn't be able to for the wall trim as it goes the wrong way (good point).

~dave [/list]