Whole build process will be at this imgur link: http://imgur.com/a/9TFcr
==========================
The start.
Received a bunch of packages (A good chunk from Frank Bear):
![Image](http://i.imgur.com/meHpUSil.jpg)
Bodged together a way to hold stuff together while I got initial welds done:
![Image](http://i.imgur.com/weABQspl.jpg)
Dry Fit:
![Image](http://i.imgur.com/uiDAmySl.jpg)
Frame Skeleton.
![Image](http://i.imgur.com/npdFVmkl.jpg)
Selfie while welding:
![Image](http://i.imgur.com/eD7bK46l.jpg)
Since I'm using Alaska Teardrop's manufacturing method idea, I had to make a forming buck:
![Image](http://i.imgur.com/GbCZ78zl.jpg)
First Cabin spar being curved:
![Image](http://i.imgur.com/lOlhmjll.jpg)
Pained the frame with POR-15:
![Image](http://i.imgur.com/vtam5kKl.jpg)
Added the first aluminum pieces for the cabin onto the lower frame.
These are held on by 1" UHB tape and 1/4" Stainless steel bolts and fender washers and #8 Stainless screws.
![Image](http://i.imgur.com/rIT6vTXl.jpg)
Cabin starts to take shape:
![Image](http://i.imgur.com/xJ3XB0el.jpg)
==================
More to come.......