troubleScottie wrote:Your tank fill may not work. Water may run out the vent prior to filling the opposite tank.
You need/should have drains somewhere. You can use the pump to drain the tanks, but values are easier. Also, the one way value might have to be moved to prevent prevent water being retained in the lines due to vacuum/airlock.
Not sure about the pump placement. My reading is that a pump can push water up to a specific height which is reasonably high, but may have difficulty lifting the water to the pump's level. You might want to have the pump lower.
Also you have no place for hot water -- although that is not necessary.
Thanks for this. Drain, check, he forgot to draw that in. I did not know that about the pump, glad we didn’t try it our way! Whew, glad we asked this question!
Sent from my iPad using Tapatalk