twisted lines wrote:OP827 wrote:I recall reports here of bedliner separation from plywood after sometime. Don't remember the build names though, sorry.twisted lines wrote:OP827 wrote:Great work! Are you covering BB ply in epoxy with light glass cloth before finish?
I am not using epoxy, (polyurethane) Caulk then 3 coats of High Gloss then Monstraliner. To old and crippled up for Fiberglass.
Sent from my Moto G Play using Tapatalk
I can picture a build or two, I only remember it was different brand's not monsterliner, Thank you for checking and making aware of possible flaws, I need can sure use guidance
Nice build you have going.
Thanks, appreciate my build compliment. After I did a Google search over this site I found the post which was about Raptor bed liner over untreated Baltic birch plywood: http://www.tnttt.com/viewtopic.php?f=65&t=65559&start=15#p1245278. I would be interested to learn other people experience with urethane bed liners put on plywood without fibreglass after a few years of being outside. Do you know such builds?