7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Converting Cargo Trailers into TTTs

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby BigDave_185 » Sun Apr 11, 2021 1:00 pm

Looks great! Can you take some more photos of your hinge. I’d like to copy similar.


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Sun Apr 11, 2021 3:23 pm

Here you go. I am done, except the 1/2 inch plywood deck and facia trim to contain the mattress. Will try to hang it tomorrow. Going to be a job to rip the old heavy wood bed platform out.

For hinges, I just drilled a hole in the wood and glued in a Teflon bushing then just used stainless hardware as you can see. There is about a 3/8 gap either side of the drawer, so I just used some fender washers and an oversize nut to serve as a bushing to space either side even and take out play. It seems to work well. That is how I had it constructed under the wood frame also.

The gas struts will go back on as well. The other strut mounts screw into the bottom of the bed deck.

Image

Image

Image


Image


Image


Image

Sent from my SM-N970U using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby BigDave_185 » Sun Apr 11, 2021 10:18 pm

Thank you good sir


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby hankaye » Mon Apr 12, 2021 6:23 am

flboy, Howdy;

Lookin' goood Don! :applause: :thumbsup:

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Mon Apr 12, 2021 7:57 am

Thanks Hank. I hope all is well with you. I get out of Covid-19 isolation tomorrow.. Overall I just had minor symptoms but I did lose my taste (some say I never had any) and sense of smell a few days ago. My wife has some respiratory issues; however, one of our daughters is a Nurse Practioner so she quickly hooked her up with some steroids and antibiotics. Wife is doing well now. All said, we have both had worse flus and colds.


We should have some immunities for a while. Time to get back out there!

Sent from my SM-N970U using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Mon Apr 12, 2021 10:27 am

Destruction complete.

Image

Sent from my SM-N970U using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Mon Apr 12, 2021 11:49 am

New frame installed. I just have to wait until I can bust quarantine tomorrow and then I will get the eyelets, re-attach cables, and install the 1/2 inch plywood decking and facia trim. This bed is super lightweight compared to the wood I took out. I lifted this in the CTC very easily by myself.

I might note, the days were numbered on the wood frame. Good thing I used the galvanized metal joist hangers and such to join the wood. Everything was loose when I took it apart. The screws were just working their way loose and breaking loose the wood threads.

Definitely glad I decided to fix this before I had more issues on the road. I don't think it would have taken too many more trips down long wash boarded dirt roads with miscellaneous potholes.



Image

Sent from my SM-N970U using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby BigDave_185 » Mon Apr 12, 2021 3:13 pm

Looks fantastic. And you gain some more head room right?


Sent from my iPhone using Tapatalk
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Mon Apr 12, 2021 4:30 pm

Thanks.

I will not gain much in the center especially since the drawer was the lowest point before as well. Will gain about 2 inches either side of the drawer..

Sent from my SM-N970U using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby hankaye » Tue Apr 13, 2021 7:09 am

flboy, Howdy;

Good to hear you and flgal are doing well and can break out today! :applause: :applause:
One thing you besides using nylock nuts you can do to prevent hardware from vibrating loose
is to use a dab of fingernail polish (lacquer paint), as a thread locker or just buy a small tube
of Lock-tite Blue.
Have you thought about how much this is going to effect your weight & balance?

Finish gettin' better.

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Tue Apr 13, 2021 3:11 pm

Quick video on new bed: I still need to add the deck, but I got the cables hooked back up. The winch makes light work of this. Bed is so light now. Decking will add another 45lbs approximately.. but still light.




https://youtu.be/R1hXaQ303Ws
Last edited by flboy on Tue Apr 13, 2021 10:35 pm, edited 1 time in total.
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby featherliteCT1 » Tue Apr 13, 2021 4:17 pm

Looking great! :thumbsup:
featherliteCT1
1000 Club
1000 Club
 
Posts: 1154
Joined: Wed Dec 28, 2016 6:54 am
Location: Southern Indiana
Top

7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby BigDave_185 » Tue Apr 13, 2021 6:10 pm

hankaye wrote:flboy, Howdy;

Good to hear you and flgal are doing well and can break out today! :applause: :applause:
One thing you besides using nylock nuts you can do to prevent hardware from vibrating loose
is to use a dab of fingernail polish (lacquer paint), as a thread locker or just buy a small tube
of Lock-tite Blue.
Have you thought about how much this is going to effect your weight & balance?

Finish gettin' better.

hank
I suggest this, if loctite is the source. It is anaerobic and dries well also allows for better quantity control. Or get a lock washer

Sorry missed the link

Loctite 826034 442 Blue Quickstix 248 High Strength Threadlockers, 9 g, 3/4" Thread, 0.317 fl. oz. https://www.amazon.com/dp/B01B79EL3O/re ... H9TQ86DAG9


Sent from my iPhone using Tapatalk
Last edited by BigDave_185 on Wed Apr 14, 2021 3:53 pm, edited 1 time in total.
User avatar
BigDave_185
The 300 Club
 
Posts: 455
Joined: Mon Oct 23, 2017 4:42 pm
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby hankaye » Wed Apr 14, 2021 8:24 am

flboy, Howdy;

Nice video, and allowing us to "stay in the loop". chuckle.

Those clevis' that you used to cobble the frame to the cables, could use
some mechanic's wire to keep the screw pins in. Referred to as "Mousing"
the pin.
https://en.wikipedia.org/wiki/Clevis_fa ... hackle.gif

The old aircraft mechanic creeps out every once in awhile. chucklein'
http://bluetunadocs.com/downloads/safewire.pdf

Stay Safe, an Healthy.

hank
Striving for a less complicated life since 1949 ...
Every day I beat my own previous record for number of consecutive days I've stayed alive.
hankaye
2000 Club
2000 Club
 
Posts: 2567
Images: 1
Joined: Thu Dec 06, 2012 5:35 pm
Location: S.W. New Mexico
Top

Re: 7'*18' V-Nose Cargo Trailer Toy Hauler Conversion

Postby flboy » Wed Apr 14, 2021 8:40 am

Thanks Hank. I was thinking about that when I was screwing them in. I saw the place for the wire. I'll do that.

Sent from my SM-N970U using Tapatalk
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4226
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

PreviousNext

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 11 guests