I need clamps!?!

[myjeepcherokee]

Hey guys, so I'm starting teardrop #2, starting to gather up tools already...and it looks like I'm going to need some clamps! Anyone know where I can get say 20 or so for a good price? Home depot had a 2 pack of 12in quick grips for 20 bucks...but I'd like to stay a little cheaper than that!

[mikeschn]

Hey guys, so I'm starting teardrop #2, starting to gather up tools already...and it looks like I'm going to need some clamps! Anyone know where I can get say 20 or so for a good price? Home depot had a 2 pack of 12in quick grips for 20 bucks...but I'd like to stay a little cheaper than that!

When HF has them on sale they are $.99 for the small ones... I musta bought 30 of them...

Mike...

[bledsoe3]

Mike's right. Harbor Freight is the place. They often have a multi pack with different sizes on sale for cheap. You can't have too many clamps.
http://tnttt.com/album_ ... ic_id=9916

[BILLYL]

Yep Harbor Frieght - look for sales on the clamps And I too must now have 30+

Bill

[Mightydog]

Bledsoe3,

That's when I usually throw down a piece of 3/4" ply on top of it and back my car on to it.

[BrwBier]

Don't clamps come under that "Murphys Law" thing. No matter how many you have it would always be nice to have one more.
Brwbier

[Ken A Hood]

I've seen PVC pipe used as well..... I think it was on here; all you need to do is cut some 1-2" rings and then cut a piece out; just a bit smaller than the thickness your clamping up

[bledsoe3]

Bledsoe3,

That's when I usually throw down a piece of 3/4" ply on top of it and back my car on to it.

Both sides had finish skin on them. I'm not taking a chance and have to build a new door.

[myjeepcherokee]

I've seen PVC pipe used as well..... I think it was on here; all you need to do is cut some 1-2" rings and then cut a piece out; just a bit smaller than the thickness your clamping up

have any pictures of this?

[mikeschn]

Here ya go... PVC clamps...

http://www.hanalima.com/tooltips_pvcclamp.shtml

Mike...

[Ken A Hood]

PVC Clamps

Materials

3-inch Schedule 40 PVC pipe scrap

Directions

Cut pipe about 1" wide, then slice it once to form clamp. The wider you make the clamp, 2-inches for example, the stronger the clamp. You can make clamps from 2-inch pipe, on up. Ideal for shop, hobby, home, whatever.

And some more uses;
More PVC projects

[scopeaddict]

PVC Clamps

Materials

3-inch Schedule 40 PVC pipe scrap

Directions

Cut pipe about 1" wide, then slice it once to form clamp. The wider you make the clamp, 2-inches for example, the stronger the clamp. You can make clamps from 2-inch pipe, on up. Ideal for shop, hobby, home, whatever.


you can make a cool tater-gun outa it also, i went with stell though,,,

johnp

And some more uses;
More PVC projects