Am I to fat

Things that don't fit anywhere else...
Post a reply

Postby PaulC » Fri Mar 02, 2007 1:01 am

madjack wrote:Paul, I have noticed that every time I get it all righ, I find that everything has shifted to the lef :D :lol: ;) ........ 8)


:laughter: :drofl: :laughter: :rofl:

Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby glassice » Sat Mar 10, 2007 1:25 am

I got done with the 1 lay up and the mold has to be cut up with the U.S.A.F watching your tax dollars.I can keep the steal plat it glass smooth on top and bottom .Is there any way to cut these in to 2 in thick for welding tables
It is not the return ON my investment that I am concerned about; it is the return OF my investment
User avatar
glassice
Silver Donating Member
 
Posts: 588
Joined: Fri Sep 22, 2006 1:23 am
Location: E nev
Top

Postby madjack » Sat Mar 10, 2007 1:58 am

Glass, are ya talking about cutting them so as to get 2 3"x5'x12' pieces??? If so, I know of no way of doing it unless it is some sort of water jet or wire cutter like those used on large rock pieces...hey, ask your A.F. buddies if you can borrow one of their lasers.....
madjack 8)
Last edited by madjack on Sat Mar 10, 2007 2:18 am, edited 1 time in total.
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby Juneaudave » Sat Mar 10, 2007 2:07 am

Glass...your moving too fast on this thread!!! I'm still back on the Uhaul deal!!! The possibilities are endless!!!

:lol: :lol: :lol:
User avatar
Juneaudave
Super Duper Lifetime Member
 
Posts: 3237
Images: 380
Joined: Sun Jul 03, 2005 12:11 pm
Location: Juneau, Alaska
Top

Postby glassice » Sat Mar 10, 2007 2:19 am

thanks. Cut the molds with a cutting torch there a rock cutting outfit just up the road . The part we made can only be trim with a lasers it has mollyem treads in it tritium dust and carbon If i could build a trailer out of this we could use as a beach ball it that light and strong .had a 18 Wheeler pick it up and got all 3 pieces at one time
It is not the return ON my investment that I am concerned about; it is the return OF my investment
User avatar
glassice
Silver Donating Member
 
Posts: 588
Joined: Fri Sep 22, 2006 1:23 am
Location: E nev
Top

Postby madjack » Sat Mar 10, 2007 2:25 am

Glassie, my curiosity is up to the cat killin' stage...but I don't really wanna know what the heck y'all bult for the A.F.(molybdenum/tritium/carbon???) since that would probably mean a visit from the gize wearing dark sunglasses and driving black SUV's :frightened: :NC :D ;)
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby glassice » Sat Mar 10, 2007 2:45 am

madjack your very Right as soon as I stared the lay up had to have approved rent a cop tell they pick it up but they did not give a dam about the mold being moved are my rink-dink shop but I am the last one left that work on them I am thinking that resin might be a Little bad for your liver
Last edited by glassice on Sat Mar 10, 2007 7:40 pm, edited 1 time in total.
It is not the return ON my investment that I am concerned about; it is the return OF my investment
User avatar
glassice
Silver Donating Member
 
Posts: 588
Joined: Fri Sep 22, 2006 1:23 am
Location: E nev
Top

Postby PaulC » Sat Mar 10, 2007 6:00 pm

glassice wrote:madjack your very Right as soon as I stared the lay up had to have approved rent a cop tell they pick it up but they did not give a dam about the mold be moved are my rink-dink shop but I am the last one left that work on them i be thinking that resin might be a Little bad for your liver


I hate to do this but " What'd he say?" :shock:

Cheers
Paul :thumbsup:
Time is the only real capital we have. Money you can replace but time you cannot.
User avatar
PaulC
3rd Teardrop Club
 
Posts: 4439
Images: 36
Joined: Mon May 24, 2004 7:27 am
Location: Laura, SouthernFlinders Ranges, South Australia
Top

Postby Nitetimes » Sat Mar 10, 2007 6:40 pm

PaulC wrote:
I hate to do this but " What'd he say?" :shock:

Cheers
Paul :thumbsup:


I'm glad you asked, I didn't wanna. 8)
Rich


Image
ImageImage
-
The strongest reason for the people to retain the right to
keep and bear arms is, as a last resort, to protect themselves
against tyranny in government.
- Thomas Jefferson -
Personally, I carry a gun because I'm too young to die and too old to take a butt kickin'.
User avatar
Nitetimes
7000 Club
7000 Club
 
Posts: 7909
Images: 194
Joined: Sat Feb 12, 2005 12:44 am
Location: Butler,PA
Top

Postby Podunkfla » Sat Mar 10, 2007 7:11 pm

Glassice... Last time I checked steel was going for better than $.50 a pound...
A hunk 5" x 5' x 12' has gotta be worth 6 or 7 thousand dollars?
Sell it and buy all the welding tables ya want. :thumbsup: :lol:
<B>~ Brick
<I>... I've done so much with so little for so long... Now I can do almost anything with nothing! </I></B>
Image...Lots more pix here!
User avatar
Podunkfla
ol' noodle haid
 
Posts: 2261
Images: 5
Joined: Fri Aug 04, 2006 9:25 pm
Location: North Florida near the Suwannee River
Top
Previous
Post a reply

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 1 guest

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group