Silicone sealant???? Madjack/Grant any one!!!!

Anything to do with mechanical, construction etc
Post a reply

Silicone sealant???? Madjack/Grant any one!!!!

Postby kirkman » Fri Jun 22, 2007 6:34 pm

I need to know what silicone sealant or other stuff to use on/around my roof vent /door/windows? HELP!!!!
:worship:
Thanks Jason!!! :?
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby Sierrajack » Fri Jun 22, 2007 7:56 pm

Use a good grade silicone designed for aluminum and/or metal. (GE Silicone II). Should be gray in color and looks like it has metal particles in it. Use liberally and if it oozes out, let it set up/dry FIRST, then remove the excess. Don't forget to dip the screw thread in it for a good seal.
Sierrajack
The 300 Club
 
Posts: 364
Images: 41
Joined: Fri Jan 26, 2007 11:44 am
Top

Postby kirkman » Fri Jun 22, 2007 8:02 pm

Sierrajack.... :thumbsup: Thanks! :oops: I should have mentioned that my tear will be covered with Durabak truck bead coating.
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby Tallguy3578 » Fri Jun 22, 2007 9:42 pm

There's also another product that is used in roofing, commercial roofing mostly, called Geocel. It is fantastic! I have several tubes here at the house that I will probably use when I get my tear underway.

By the way, I would mention that I've thrown in my two cents, a la MadJack. However, I've recently been informed by my wife that I can't have my two cents yet! I haven't earned enough! :lol:
Image

I want to share something with you: The three little sentences that will get you through life. Number 1: Cover for me. Number 2: Oh, good idea, Boss! Number 3: It was like that when I got here.
User avatar
Tallguy3578
Teardrop Master
 
Posts: 117
Images: 4
Joined: Tue Jun 05, 2007 3:03 pm
Location: Manchester, KY
Top

Postby Micro469 » Fri Jun 22, 2007 10:08 pm

Tallguy3578 wrote:There's also another product that is used in roofing, commercial roofing mostly, called Geocel. It is fantastic! I have several tubes here at the house that I will probably use when I get my tear underway.

By the way, I would mention that I've thrown in my two cents, a la MadJack. However, I've recently been informed by my wife that I can't have my two cents yet! I haven't earned enough! :lol:


Arn't wives wonderfull??? :R
John
Image
User avatar
Micro469
Super Lifetime Member
 
Posts: 3185
Images: 382
Joined: Mon Nov 07, 2005 10:46 pm
Location: Brampton,Ontario,Canada
Top

Postby madjack » Fri Jun 22, 2007 11:25 pm

...having had issues in the past with silicone, I don't recommend it...some other options...1) auto windshield sealant/adhesive(my present preference) 2) butyl tape...this is the grey "putty inna tape" that is used almost universally in the commercial RV or 2) something like SikaFlex221/252 ...these are urethane sealers and there are other brands on the market.....
madjack 8)
...I have come to believe that, conflict resolution, through violence, is never acceptable.....................mj
User avatar
madjack
Site Admin
 
Posts: 15128
Images: 177
Joined: Thu Dec 02, 2004 5:27 pm
Location: Central Louisiana
Top

Postby kirkman » Sat Jun 23, 2007 6:37 am

Tallguy..Thanks! :)

Madjack...Thanks Looks like I will give your current favorite a try! :thumbsup:
"If you think you are too small to make a difference, try sleeping with a mosquito." -- Dalai Lama XIV
User avatar
kirkman
1000 Club
1000 Club
 
Posts: 1270
Images: 55
Joined: Sat Mar 19, 2005 11:42 am
Location: Elmira, NY
Top

Postby Geron » Sat Jun 23, 2007 7:44 am

A tip for using caulk:

Learned this watching a guy install granite counter tops.

Use Painters Tape to keep the caulk off where you don't want it to go.

While the caulk is still wet, remove the painters tape. Nice clean line with little or no clean up. This handles squeeze out (apply the tape to the molding line before installation) as well as caulking molding already in place.

g
If it's not broken, you're not trying hard enough.
User avatar
Geron
1000 Club
1000 Club
 
Posts: 1522
Images: 173
Joined: Tue Jan 18, 2005 6:23 am
Location: Georgia, Cherrylog
Top

Postby SteveH » Sat Jun 23, 2007 8:04 am

I used silcone seal everywhere on my trailer...the aluminum colored stuff from the box store. Other than having to return one bad tube for credit (it was hardened in the tube), I've had no problems whatsoever in going on three years of use.
SteveH
Calling an illegal alien an "undocumented immigrant"is like calling a drug dealer an "unlicensed pharmacist ".
User avatar
SteveH
2000 Club
2000 Club
 
Posts: 2101
Images: 42
Joined: Mon Nov 01, 2004 8:28 am
Location: Bexar Co, TX
Top

Postby fornesto » Mon Jun 25, 2007 1:18 pm

Silicone holds pretty well, but I find that it will peel right off if you tug at it. It seals well, but doesn't bind real good. I have to maintain my silicone annually.
User avatar
fornesto
Donating Member
 
Posts: 774
Joined: Fri Jun 25, 2004 5:12 pm
Location: Lodi, CA
Top

Marine silicone

Postby Charles Ipes » Wed Jun 27, 2007 5:46 pm

Marine Silicone works great for me.
Freedom!
User avatar
Charles Ipes
Teardrop Advisor
 
Posts: 85
Images: 25
Joined: Sun Feb 13, 2005 11:16 pm
Location: Louisiana
Top
Post a reply

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 3 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group