Hatch spring

[kurtibm]

Has anyone tried this type of hatch spring?

http://www.thomasregister.com/olc/SmartCat.aspx?az=72827629&type=details&ptno=DH-12026&template=http://www.spdhardware.com/spdecomm.htm
Seems that this type might prevent the preload associated with a gas-spring, (hard on the hinge) but with the downside of no lift assist.
I use a modified "broomstick" method currently, but want to prevent the ghastly "wind-blast-ruins-hatch" syndrom.
Anyone?

[Cutterpup]

I have used this type of spring holder on sailboat hatches; the only problem is sudden drops
when you accidentally hit one when moving around than the hatch drop very quickly. If you use two dropping the hatch would be much harder.

Dan

[IraRat]

Dan, I just sent you a PM, but you can ignore it:

What kind of black trim are you using there, and where did you get it?

[Cutterpup]

Ira, The trim is painted Aluminum. I would have gone for anodized or powder coating but paints cheap!

First a wipedown with vinegar. then a primer coat and the gloss black. I have a local aluminum supply co that sells this stuff in 16 ft lengths for about $5 to $10 each. Sorry they don't ship at that price. But they are open on Saturday.

Dan