Well finally started my build, i bought an old trailer tent for the chassis & have made a couple of changes to it, I have the floor & sides cut out so hopefully i will soon start to assemble it.
The chassis was a good buy, the bearings are ok the indispension units are as good as new, i have had to extend the axle as the chassis is 3ft wide & my floor is 4ft so the wheels were too close, i also replaced the hitch.
I will hopefully post some pics of the finished chassis soon.
that makes 2 newb's then !. the size of the trailer chassis is 6 foot x 3 foot
as my floor size is 6' 6" x 4', so i am using 3/4" ply for the floor to make sure it will be strong enough where it overhangs the chassis.
like i said i am also new to this so time will tell if it works out ok,
The Whinge wrote:Tried to post pics but to no avail ! but managed to get them into my album
to the playground.
To get the pictures from the album you need to click on the thumbnail pic., copy the url address at the top of the page. Then in the post click Img in the menu, right click and paste then click on Img or close tags.
Your lookin good there! It will go very fast until the details.
“Forgiveness means giving up all hope for a better past.â€
Well the project is starting to take shape, i am not bothering with the kitchen as i will only be using it for bike rallies so i prefer to have as much space inside as possible.
New pics in album
i have started on the storage side of things inside & i'm toying with the idea of a single raised bed as i will be using it just for myself, anyone got any ideas on this ?