Some one asked how I built my door, this is how.
Irip some one bys to the desired thickness of the door. (Minus the outer two layers).
I fastened the two outer layers together. I'm using 1/4" BC plywood. Layout the shape of the door and cut out. I used a skill saw, Jig saw, and router on this door.
I cut the one bys to fit. I fasten the one bys to one side with glue and brads. I used plywood in the corners and cut the radiuses.
Insulate the door, and attach the other side and that's it.
Doors are easy.