I have made some progress. It has been building cabinets for what seems like forever. All of the cabinets were replaced. Most were using the original and mostly rotted as patterns. The galley was a different layout and had to be scratch built.
It still needs new upholstery. I pulled off some covers and found what must be the original material. Actually not bad except the horse hair padding has broken down and the springs are leaving their pattern on the seats. They are someplace for me and my boys to sit for now.
My boys enjoying the AC
Here are some views through the door and one from the back. The area to the right of the potty stowage compartment was going to have some waisted space until I thought of cubbies. Those should be hand for flashlights and such. Easy reach when standing outside the rig.
One of the challenges was potty stowage. I mounted a drawer slide on the floor and a platform the potty sits on.
The American converter along with amp and volt meter, volt meter on switch (also turns on the lights of both meters) a refrigerator DC off switch and a GFI outlet.
AC, refrigerator and potty....the important stuff is ready.
Still need to build a shelf for the back and the table that attaches to the shelf along with trim strips that will cover the edges of the paneling. Also the complete water system needs to be installed and all the sewing work.
Jerry