before the build. Does anyone have software recommendations for this? I've fiddled with some 3d apps before but never really used a CAD. Also if there is another thread, I didnt see it, please point me to the existing thread if I missed it.CAD
4 posts
• Page 1 of 1
CAD
by kenbrian » Wed Aug 03, 2011 8:50 am
I would love to design my TD in 3D before the build. Does anyone have software recommendations for this? I've fiddled with some 3d apps before but never really used a CAD. Also if there is another thread, I didnt see it, please point me to the existing thread if I missed it.
before the build. Does anyone have software recommendations for this? I've fiddled with some 3d apps before but never really used a CAD. Also if there is another thread, I didnt see it, please point me to the existing thread if I missed it.-
kenbrian - Teardrop Inspector
- Posts: 8
- Joined: Wed Apr 14, 2010 3:20 am
- Location: Oregon, USA
by GuitarPhotog » Wed Aug 03, 2011 10:25 am
The forum has an entire section devoted to CAD and the like here http://www.mikenchell.com/forums/viewforum.php?f=36
I used TurboCad for years for mechanical design. It's cheap and ACad compatible.
<Chas>
I used TurboCad for years for mechanical design. It's cheap and ACad compatible.
<Chas>
My Vintage Trailer Blog
http://www.charlesLwebster.com/teardrop
http://www.charlesLwebster.com/teardrop
- GuitarPhotog
- Silver Donating Member
- Posts: 1779
- Images: 55
- Joined: Tue Feb 08, 2011 12:52 pm
- Location: Grants Pass Oregon
