This is the trailer frame I bought from Northern Tool
My brother helped me by welding on jacks to stabilize the trailer
Tar is the worst to work with!
Subfloor and first wall bolted down
Starting to take form refuled my motivation
Bottom of galley and counter installed
Ceiling liner installed used decorative panneling for ceiling bent easily after making a stop on head board for it to seat into
Interior cabinet face installed
Back view of galley without cabinets
Wired 12 volt and ran back to galley
Roof being glued down should be waterproof and duable its refrigerated semi trailer liner! Thanks to my friend Mark for the hook up!
Progress so far gives me a third wind of motivation
All 12 volt lights and fan are installed
RECORD TEXAS HEAT + AIR CONDITIONING TECH = NO TIME FOR TEAR
so 3 months later
110 volt installed next to 12 volt utilities done
Utility cabinet installed plan to make a bulkhead for cabinet and secure it with brackets and velcro so I can used 5 of the 8 inches for additional storage
Mirroring pantry cabinet installed in galley
Wife installed floor looks good
Sister ships Mark's T.E.A.R. (Totally Experimental Adventure Rig) and my yet to be named tear (both first time builds and done concurently)