10' Standie Foamie ... on hold

Canvas covered foamies (Thrifty Alternatives...)

Moderator: eaglesdare

Post a reply

Postby Mauleskinner » Sat Sep 24, 2011 8:20 pm

mikeschn wrote:
Aligator944 wrote:Mike,

How are you planning to finish the inside of the roof?


I plan on doing the inside with canvas and paint too. I don't think we are going to do anything with the kerfs on the inside. They will show through the canvas a little bit, but it shouldn't be too bad.

I think I will cut the canvas into 2 1/2 foot wide pieces and just cover one section and two spars at a time.

Mike...

Just a thought, Mike...would it be more time-effective to tack a full-length canvas piece up to the ceiling with a batten at each spar that's narrow enough so that the majority of the spar is accessible for gluing (say, 1/4" wide batten on 3/4" wide spar?), and then once that's dried, remove the battens and coat that area?

Might also deal a little better with any shrinkage that way?

Enjoying the build...:thumbsup:

David
User avatar
Mauleskinner
The 300 Club
 
Posts: 350
Joined: Tue Aug 21, 2007 8:57 pm
Location: Southern MN
Top

it all makes sense now

Postby millstone » Wed Sep 28, 2011 4:24 pm

The 2 inch cut was where the roof meets the floor. And to ensure the continuity of the curve the sides extend below the floor.

I feel pretty stupid now. Nice looking build.

Mark
User avatar
millstone
Silver Donating Member
 
Posts: 74
Images: 0
Joined: Tue Jul 05, 2011 3:53 pm
Location: Georgia
Top

Postby wagondude » Fri Oct 07, 2011 11:02 am

Any more progress?

Bill
Bill

TnTTT ORIGIONAL 200A LANTERN CLUB
101137
User avatar
wagondude
1000 Club
1000 Club
 
Posts: 1535
Images: 35
Joined: Sun Jan 16, 2011 7:41 pm
Location: Land of the Jayhawks
Top

Postby mikeschn » Fri Oct 07, 2011 5:38 pm

The plan is to get out this weekend... but otherwise, no, not yet.

And tomorrow morning is shot, we gotta go out on a service call.

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Miriam C. » Sat Oct 22, 2011 11:45 am

:thinking: :worship: Are we there yet! I will have a garage in Feb. :worship: :twisted:
“Forgiveness means giving up all hope for a better past.â€
User avatar
Miriam C.
our Aunti M
 
Posts: 19675
Images: 148
Joined: Wed Feb 15, 2006 3:14 pm
Location: Southwest MO
Top

Postby GPW » Sat Oct 22, 2011 7:51 pm

A Garage is such a Great thing to have !!!! :thumbsup: 8) :D
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14920
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans
Top

Postby Wolffarmer » Sat Oct 22, 2011 10:47 pm

Miriam

Nice to hear that things are getting done there. But those big trees take to long to grow.

Are you thinking of a foamie in your future?

:D

Randy
"these guys must be afraid of the dark"
User avatar
Wolffarmer
Donating Member
 
Posts: 4612
Images: 309
Joined: Wed May 02, 2007 1:32 pm
Location: Idaho Rupert
Top

Postby GPW » Sun Oct 23, 2011 5:48 pm

Whatever happened to this Foamie build ... :o Sure would like to see this one done ... Great Expectations for this one !!! :thumbsup:
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14920
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans
Top

Postby mikeschn » Tue Oct 25, 2011 4:08 pm

I've had to set up my storage tent, and put the foamie in there for the winter. It's gotten so cold up here... :cry:

I'm at the point where I need to sand the vinyl spackling... and I've just not been in the mood for sanding... reminds me too much of drywall.

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby GPW » Tue Oct 25, 2011 4:44 pm

Sad!!! :cry: But you’re more than welcome to bring it down here and work on it .... it’s 80F here right now ... 8)
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14920
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans
Top

Postby mikeschn » Tue Oct 25, 2011 5:11 pm

Can I drop it off, and you sand it? ;)

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 475
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby eaglesdare » Tue Oct 25, 2011 7:13 pm

:lol:
Louella
May the foam be with you.
User avatar
eaglesdare
Donating Member
 
Posts: 3168
Images: 13
Joined: Tue Aug 26, 2008 7:06 pm
Top

Postby GPW » Wed Oct 26, 2011 8:39 am

Sand !!! :o Can’t do that , it’s just too darn HOT !!! :lol: :lol: :lol:
Just kidding , but Mike, if you actually Needed to do that , I’d be Glad to assist .... :thumbsup:
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14920
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans
Top

Postby tinksdad » Wed Oct 26, 2011 10:01 am

mikeschn wrote:Can I drop it off, and you sand it? ;)

Mike...


On your way to GPW's, you almost have to go through my neighborhood on the way down. Stop by and we'll caravan together. It will give me an opportunity to see how a big foamie tows. Has nothing to do with having another reason to go to NOLA to see the twins (and my daughter).
User avatar
tinksdad
500 Club
 
Posts: 966
Images: 155
Joined: Mon May 05, 2008 9:20 pm
Location: Olive Branch, MS
Top

Postby eaglesdare » Wed Oct 26, 2011 10:36 am

well heck stop by my way and i'll join ya's. ;)
Louella
May the foam be with you.
User avatar
eaglesdare
Donating Member
 
Posts: 3168
Images: 13
Joined: Tue Aug 26, 2008 7:06 pm
Top
PreviousNext
Post a reply

Return to Foamies

Who is online

Users browsing this forum: No registered users and 2 guests

Custom Development by Motivo Solutions | Powered by phpBB® Forum Software © phpBB Group