Teardrops n Tiny Travel Trailers

by **pete42** » Wed Oct 26, 2011 3:12 pm

Down I-75 hang a left in Dayton let's all go to GPW's

by **GPW** » Wed Oct 26, 2011 4:15 pm

Iâ€™ll do the cooking , you guys bring the sandpaper .... and the Beer ... :lol:

by **tjsabo** » Wed Oct 26, 2011 5:30 pm

Give us about 3 weeks we will be ready for paint maybe GPW can paint it With a mural on the sides for us :lol:

Tim

by **GPW** » Wed Oct 26, 2011 5:58 pm

I can do that !!! :thumbsup:

by **Tiredoldwhiteman** » Wed Oct 26, 2011 6:00 pm

GPW wrote:.... and the Beer ...

500 lbs each or divvied equally?

by **GPW** » Wed Oct 26, 2011 6:03 pm

TOWM , divided equally should do ... for a time ... :roll:

You know, Foamies with a canvas skin are just Naturals for some murals ... that was my original idea for mine ... just got sidetracked ...

by **TJinPgh** » Fri Oct 28, 2011 1:59 pm

Hiya.

New here but watching this thread with great interest.

Since you seem to be at the point where you're going to start skinning the outside soon, I was curious about something for a possible coating.

Since the foam can be primed (right?), has anybody considered the possibility of using bedliner coating to cover it with?

The stuff is lightweight, extremely durable and can either be sprayed or rolled on, depending on the volume of it you need.

It's normally purchased in black but other colors can be ordered or it can be painted.

I tried spraying some of the rustoleum brand of it on a simple piece of styrofoam and it melted a good bit. The duplicolor brand I used to spray the plastics on a motorcycle was clogged so I didn't get to try that but I'd imagine it would do the same. If the piece can be primed first, though, that wouldn't be a problem, I'd think.

Just thought it might be worth considering?

-TJ

by **crumbruiser** » Fri Oct 28, 2011 7:32 pm

Hello TJ,
Here a link to the forum about bedliner and foam.
http://tnttt.com/viewtopic.php?t=46662
Frank

by **GPW** » Fri Nov 11, 2011 8:41 am

Mike , youâ€™re not really gonnaâ€™ make us wait till Spring to see this finished eh .... ?

What a Cliffhanger !!! :shock:

by **eaglesdare** » Fri Nov 11, 2011 11:00 am

GPW wrote:Mike , youâ€™re not really gonnaâ€™ make us wait till Spring to see this finished eh .... ? What a Cliffhanger !!!

ditto!

by **tjsabo** » Fri Nov 11, 2011 6:31 pm

Well if he is working on it outside it was snooooowing hear yesterday :shock:

Tim

by **GPW** » Sat Nov 12, 2011 7:19 am

SNOW !!!!

BRRRRR!!!! Good time to be INSIDE a Foamie !!!

by **eaglesdare** » Sat Nov 12, 2011 7:43 am

actually with snow, its a better idea to be inside a house with heat! :lol:

by **GPW** » Sat Nov 12, 2011 8:07 am

Sorry, we donâ€™t get snow here but once every ten years or so , and it only lasts a couple hours and then is gone ... so I have little experience with the white stuff ... However , it does appear to be VERY COLD !!!

by **mikeschn** » Mon Nov 14, 2011 8:02 pm

GPW wrote:Mike , youâ€™re not really gonnaâ€™ make us wait till Spring to see this finished eh .... ? What a Cliffhanger !!!

There's not much warm weather left this year... It might have to wait til next spring...

Besides I am trying to decide how to round over the outside edges, with a little more precision than just eyeballing it.

Mike...

Teardrops n Tiny Travel Trailers

10' Standie Foamie ... on hold

Who is online