Did I miss anything, about to start welding?

[Glenn Davies]

sharpscan%40dannburg.com_20120305_102854.pdf

(70.7 KiB) Downloaded 54 times

sharpscan%40dannburg.com_20120305_102854.pdf

(70.7 KiB) Downloaded 54 times

[Glenn Davies]

I plan on building a modified Benroy plan. I will be adding some curves on the front bottom and rear bottom, for an overall length of 10". I will be towing it with my '47 Chevy truck with air-ride suspension so i'll be sticking with the traditional 4' height.

[CARS]

Your center of weight doesn't make sense, but that shouldn't stop your plan to weld.

My point is you are not taking the tongue into consideration.

[Glenn Davies]

the front curve of the nose will over-hang about 2 feet over the front of the front frame?

[CARS]

the front curve of the nose will over-hang about 2 feet over the front of the front frame?

OK. I guess I should have researched your build design better. I'm building a Cub type of thing... It overhangs the same front to rear.

[Big Dave]

Glenn, stop screwing around, let's burn some metal!!

It looks well thought out, but no mention of whether the tear will also be bagged?
You should start a build journal, it's pretty motivating.