It seems the best and most common foams to use is what is known as XPS or EPS (same stuff different names) (Extruded PolyStyrene). It's the solid panels of foam sold as home insulation. Either pink from Owen Corning or blue from DOW? I think there's green stuff too but I don't know who manufactures it. The white beaded stuff is not very strong. The extruded stuff is better for our needs.
Mel
"Believe in your abilities... Remember amateurs built the ark, professionals built the Titanic"
"Indecision may or may not be my problem" Jimmy Buffet
I think I have also fallen victim to using XPS and EPS interchangeably, but have also read that EPS is often incorrectly called out.
Some sources say that EPS = Expanded Polystyrene (the white bead stuff) and XPS = Extruded Polystyrene (the construction board that we all are so enamored with).
I wonder about reshaping a router bit ( 1/8" straight gouge ) to the shape of the "V" notch you need. You would need a bench grinder and "Drimble - type" tool with cutting wheel ( to cut a groove down each side for product removal relief of the bit ). Just an idea
Pat
P.S. I enjoy Foamies .... I pull a steel sided one I'm watching the foamies ..... to make a larger box on my frame
junkboy, was reading a build thread talking about kerfs and this exact thought hit me. Instead of using a saw blade use a v shaped router bit someone must make one.
Boys never grow in to men the toys just get more expensive and more dangerous
Maybe a square bowl ?? ... perhaps usable as a front end for a trailer ???
We really need to investigate this kerfing’ business more . With Heat bending on a small scale being problematic for the home builder , the kerfing' process becomes even more important than ever if we want to build something other than angular boxes ... hot wire seems the least messy way to go ...
My previous comment about the triangles having 60 deg corners was bugging me, so I looked into domes a little further. Turns out that in order to form loft the triangles are not symmetrical.
Now I am thinking that the way to do it would be to make a hot wire cutter that has the pattern of one section of the dome, then repeat that as a plunge cut over and over to cover a broader area.
Hmm. Still doesn't work. A wedge shaped section would need to be removed from each cluster. Maybe do a cluster of clusters (like a flower bud with one in the center and additional clusters around each perimeter chord of the center cluster. Form and glue the seams.
Sounds like more time and work to make nice than other methods.