After much research I decided to build a 5X10 using ideas I gleaned from mostly this site.
I started by buying the steel for the frame and welding it together.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908282.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908288.jpg)
I used a Tourflex axle careful to make sure it was the correct width and application for what I wanted to build. I am towing it behind my 52 Chevy so I wanted to use the same tires and rims on the teardrop.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908312.jpg)
Stored in the garage.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908313.jpg)
Painting the frame was the next step.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908317.jpg)
It was easy to flip over at this stage.
I wanted to see some progress so I decided to cut out the walls after carefully planning where everything went.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908280.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908287.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908292.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908296.jpg)
I decided to put some cabinets under the floor.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908279.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908274.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908285.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908279.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908295.jpg)
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908307.jpg)
I painted it with two coats of primer and then flat black. Notice the groves in the wood so I can run the wiring. All seams were calked and sealed.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908278.jpg)
Now for the sides.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908297.jpg)
Attached to the floor from underneath. These saw horses were a godsend. Easier to work on underneath.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908306.jpg)
Better view of the floor hatches.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908304.jpg)
Now time for the flooring.
![Image](http://pic60.picturetrail.com:80/VOL1763/8338179/24077866/401908330.jpg)
I'm still working on it, wiring, floor hatch trim then cabinets. Will post more later.