filling holes and voids

[rbaumbauer]

I have alot of screw holes to fill and few goos sized voids on the ext. i was thinking of useing liquid nails on the out side and thoughts

[Kharn]

How are you going to finish the exterior? Paint, aluminum, stain?

[rbaumbauer]

going to finish with boat paint amd epoxy.

[parnold]

I like Bondo because it hardens so fast and you can start sanding within minutes. Many have created different concoctions with sawdust and epoxy, microspheres and epoxy, etc. If paint is going on top, save yourself a lot of time and use Bondo.

[CliffinGA]

They also make a bondo patch thats epoxy and fiberglazs strands that sorks for large area's also.

Cliff

[rowerwet]

I used the same as the TD was put together with, PUpremium, I have no fasteners in my TD except those needed to hold the box on the frame, and the door hinges. the adhesive is tough enough to tear the wood apart, and fasteners cause leaks/rot

[rowerwet]

I used the same as the TD was put together with, PUpremium, I have no fasteners in my TD except those needed to hold the box on the frame, and the door hinges. the adhesive is tough enough to tear the wood apart, and fasteners cause leaks/rot