I've been busy piddling with The Big Pink... still working on mounting the wings and adding an air conditioner. The door I bought turned out to be smaller than the description said it was
![Sad :(](./images/smilies/econ_sad.gif)
, so I ordered a different door. I'm building a shelf to mount the AC through the side wall. The front wall has too much curve to it. details to follow...
added some pinstripes
![Image](https://www.tnttt.com/gallery/image.php?album_id=2997&image_id=121022&mode=thumbnail)
Finally finished bolting the TD to the trailer, no pictures , but I had to bolt the rear half of the trailer to the frame. The front had a coupla bolts and the dropdown floor to hold it in place, but the rear of the trailer was moving sideways about a 1/2 " total.
and I'm working on a rear bumper... found these "shock mounts" in the trash. They match up to the holes in the trailer frame perfectly. I have a piece of 2" square aluminum tubing I may use as the actual bumper, or I might make one of wood (if it doesn't look too cheesy)
![Image](https://www.tnttt.com/gallery/image.php?album_id=2997&image_id=121023&mode=thumbnail)