It's been a while since i posted any updates but I've mainly just been layering on the canvas and glue and paint so not worth talking about
I've also been waiting on a dry day so i could cut open the front.
And today was the day.
First i re-undercoated the base of the box..

Then i went inside the trailer and drilled out through the front wall

Then i joined the dots on the outside..

And then did the one thing i was dreading the most

Thankfully it all worked

then things went a little bit wrong, the nozzle on my last tube of silicone broke off and the silicone kind of exploded all over the place. I had to use a kitchen spatula to paint the silicone on and it all went a bit messy


then i started the inside framing

Now it's all strapped up and left to dry overnight..

Lots more painting to do and i still need to run some bolts through the floor to secure it properly.