Whatcha do on your build today?

[Ron Dickey]

i painted primer on the bottom of the cabinet that is above our heads when we sleep, next step is to paint it white blue, then stain the wood walls and install the reading lights.

When I started this project, I tried to do it in several months and made several mistakes. So now I have slowed way down to correct them and make a better trailer.

ron

[KennethW]

I got a counter extension installed. fold up,slide out and put stick under. Click on pic's to inlarge
folded up
Up and ready

I also got a 19" 12 volt TV installed with a home made antenna. (search for a coat hanger antenna)

Walmart 19" TV has a wall wart with a 12 Volt output. I spliced in a 12 volt plug
The outlet cover is to lead the antenna wire in side
cooler out,stove ready and game on the tube

[nevadatear]

Installed new door weatherstrip, winterized and stored away in garage. . Waiting until spring.

[Glenn Butcher]

I lengthen-ed my tongue. On the trailer...

[working on it]

I lengthen-ed my tongue. On the trailer...

I've got that beat...I drilled two 1/2" diameter holes in my tongue

tongue.jpg (9.65 KiB) Viewed 810 times

...also on my trailer. haha Actually, I was concerned about the chain attachment point on my tongue, a single link welded under the tongue. Perhaps it was sufficient when the trailer was under 500 lbs, but I worried about it tearing loose with the now 1538 lbs (down from 1775 lbs) trailer. My coupler is very well welded to the tongue (3 x 3 x .1875 square tube), so I figured that I could use the two holes in the coupler's sides (for bolt-on purposes) for attaching the chains. I now have them attached via two 1/2" Grade 8 bolts/nuts/lock washers/flat washers, and tied to the tongue further back with u-bolts. Now I'm pretty sure that the three-point attachment of each safety chain will be quite sufficient. No pics yet.

[len19070]

I did something very important on my 13' Scotty HiLander build this weekend.

With the sale of my RT Tear,



I Paid off all my Bills on my Scotty!



Happy Trails

Len

[Vedette]

Went out and brushed 6" of wet snow off of "Kermit"
It is still outside!

Good Roads
Brian & Sandi

[canned o minimum]

So if I'm only "remodelin" the interior, izzat still considered a "build" ? Cause I'm now workin on the galley since I got the "cabin" insulated with 3/4 inch foam insulation, and skinned with Red Oak panelin.She's a 1946 that was never planned to be "finished" on the interior,but I had other plans since I plan to use it year round.

[Modstock]

I did something very important on my 13' Scotty HiLander build this weekend.

With the sale of my RT Tear,




Len

Im starting to like RT's do ya have any build pics ?

[len19070]

I did something very important on my 13' Scotty HiLander build this weekend.

With the sale of my RT Tear,




Len

Im starting to like RT's do ya have any build pics ?

Sure, http://s26.photobucket.com/user/len1907 ... t=2&page=1

This RT design was one of the most comfortable trailers I've ever built. With the dropped floor at the rear you could sit on the end of the bed and put your shoes (that could be stored inside) on and at night it was very easy to use the "Coffee Can" from that same position.



Happy Trails

Len

[bobhenry]

Were are these morons coming from ?

Stomp it out quick . This is the 3rd one I have found in the 5 minutes I have been on.

Admin's HELP HELP HELP !

[felixx]

Ordered trailer hardware this morning
Won two tyres for the rims I have for $22 each on trademe
Getting close to start time

[Roly Nelson]

Pullled my 450 lb woody teardrop out of the workshop and into the enclosed storage area, ready for sanding and varnish. Gotta get this show on the road, now that the 10 inches of snow has melted in my So Calif town.
Roly

[KCStudly]

Nuthin'.

[camper4life]

Finally mounted my roof rack brackets and put up my new curtains that I made this past weekend