Pop top or bubble roof on CT?

Converting Cargo Trailers into TTTs

Pop top or bubble roof on CT?

Postby munchmeister » Sat Jan 16, 2016 3:22 pm

I'm looking for the cheapest way to get a toy hauler that is super light (Subaru Forester) that I can convert to travel in. AND that I can stand up in. Anybody every added a pop top, bubble top or other modification to a CT? Most of the available, lighter weight CTs are less than 6 foot high (my height). Might pull easier if the profile were only a bubble top or something.
User avatar
munchmeister
Teardrop Inspector
 
Posts: 14
Images: 4
Joined: Sun Sep 07, 2014 7:03 am

Re: Pop top or bubble roof on CT?

Postby FIREBALL05 » Sun Jan 17, 2016 12:13 am

I have been thinking of this too. Would certainly think someone has done it.

Here's a super cool commercial off road version:
http://northwestoverland.com/wp-content ... ployed.jpg
FIREBALL05
Teardrop Builder
 
Posts: 37
Joined: Tue Aug 19, 2014 3:24 pm
Location: Central PA

Re: Pop top or bubble roof on CT?

Postby Treeview » Sun Jan 17, 2016 11:52 am

Trolley top makes sense to me...I'm 6'2" and I don';t like to have to lean over all of the time.

My concern with raising the roof is that the ribs act as rafters which add to the structural strength of the unit. Not just spanning the roof. Holding the walls together too.

I know it can be done. Asking the manufacturer might help too.

Inspiration!

http://www.tnttt.com/viewtopic.php?f=50&t=54108&start=75

Tom
User avatar
Treeview
The 300 Club
 
Posts: 498
Images: 30
Joined: Sun Nov 27, 2011 9:22 am
Location: Land of 10,000 Lakes
Top

Re: Pop top or bubble roof on CT?

Postby bentrotor » Sun Jan 17, 2016 1:24 pm

If you are looking for the lightest and cheapest toy hauler that can be pulled with a small vehicle google "yuppie wagon trailer" - I am not computer smart enough to add a like. They make a small enclosed trailer being pulled by a Smart car. It is all plastic and you can even buy just the enclosure and put it on a Harbor Freight trailer if that option makes a difference. I have been reading ttnt for a couple of years now (do not post very often) but your question seemed to deserve this particular answer. I have mentioned this manufacture a couple of times on this forum and the response seemed lack luster. Several folks on here have indicated they seem to lack the time, tools, facilities, skills, etc but they still want to enjoy this type of recreation but are held back due to the reasons stated. I already have a 6 x 12 V-nose and 1/2 ton pickup so I don't have as use for this particular brand of trailer. However, if I was in the market for a small lite weight enclosed trailer, this one would be the first one I would look at.
For the record. I have absolutely no connection what so ever with this manufacturer, and only referring them is because it would seem to be another option that may solve the question.
bentrotor
Teardrop Builder
 
Posts: 27
Joined: Sun May 08, 2011 10:11 am
Location: LaPorte Tx
Top

Re: Pop top or bubble roof on CT?

Postby Treeview » Sun Jan 17, 2016 1:47 pm

User avatar
Treeview
The 300 Club
 
Posts: 498
Images: 30
Joined: Sun Nov 27, 2011 9:22 am
Location: Land of 10,000 Lakes
Top

Re: Pop top or bubble roof on CT?

Postby munchmeister » Sun Jan 17, 2016 7:25 pm

Treeview wrote:Trolley top makes sense to me...I'm 6'2" and I don';t like to have to lean over all of the time.

My concern with raising the roof is that the ribs act as rafters which add to the structural strength of the unit. Not just spanning the roof. Holding the walls together too.

I know it can be done. Asking the manufacturer might help too.

Inspiration!

http://www.tnttt.com/viewtopic.php?f=50&t=54108&start=75

Tom

Yeah, I thought about that as well, especially with a CT, those ribs are very structural. Trolley top, hadn't heard that term before, but that is exactly what I was thinking about. I've seen a few DIYs with truck toppers used as roofs, but none are 6' tall. Some sort of pop top would work too, like a Cricket trailer. Looked at those but their rear hatch is only 41 x 41", too small for even my small Yamaha TW200, which Is what I would like to haul. Or the type of pop up used with VW Westfalia's. Too bad there is not a company that supplies tops as an after market deal. I have seen companies that make the large bubble tops for full sized vans but that is too big. DIY is probably the only way to go.
User avatar
munchmeister
Teardrop Inspector
 
Posts: 14
Images: 4
Joined: Sun Sep 07, 2014 7:03 am
Top

Re: Pop top or bubble roof on CT?

Postby munchmeister » Sun Jan 17, 2016 7:27 pm

bentrotor wrote:If you are looking for the lightest and cheapest toy hauler that can be pulled with a small vehicle google "yuppie wagon trailer" - I am not computer smart enough to add a like. They make a small enclosed trailer being pulled by a Smart car. It is all plastic and you can even buy just the enclosure and put it on a Harbor Freight trailer if that option makes a difference. I have been reading ttnt for a couple of years now (do not post very often) but your question seemed to deserve this particular answer. I have mentioned this manufacture a couple of times on this forum and the response seemed lack luster. Several folks on here have indicated they seem to lack the time, tools, facilities, skills, etc but they still want to enjoy this type of recreation but are held back due to the reasons stated. I already have a 6 x 12 V-nose and 1/2 ton pickup so I don't have as use for this particular brand of trailer. However, if I was in the market for a small lite weight enclosed trailer, this one would be the first one I would look at.
For the record. I have absolutely no connection what so ever with this manufacturer, and only referring them is because it would seem to be another option that may solve the question.

Nifty trailer. Web site is kinda goofy though. Can't find anywhere where the list the height of the interior. May I am missing it?
User avatar
munchmeister
Teardrop Inspector
 
Posts: 14
Images: 4
Joined: Sun Sep 07, 2014 7:03 am
Top

Re: Pop top or bubble roof on CT?

Postby munchmeister » Sun Jan 17, 2016 7:36 pm

This VMI is very cool. But $26,000??? Lordy !

Image
User avatar
munchmeister
Teardrop Inspector
 
Posts: 14
Images: 4
Joined: Sun Sep 07, 2014 7:03 am
Top

Re: Pop top or bubble roof on CT?

Postby johndep » Sun Jan 17, 2016 8:13 pm

Not sure exactly what your looking for. Here is an idea. Haulmark Flex 5x8'8", this will be my cargo camper build this winter. gallery/image_page.php?album_id=4224&image_id=138903
johndep
Teardrop Inspector
 
Posts: 7
Images: 8
Joined: Sun Jan 17, 2016 5:13 am
Top

Re: Pop top or bubble roof on CT?

Postby munchmeister » Mon Jan 18, 2016 12:22 am

johndep wrote:Not sure exactly what your looking for. Here is an idea. Haulmark Flex 5x8'8", this will be my cargo camper build this winter. gallery/image_page.php?album_id=4224&image_id=138903


Dang, I like that. Never seen one like it. Could be just the ticket. Thanks !! :)
User avatar
munchmeister
Teardrop Inspector
 
Posts: 14
Images: 4
Joined: Sun Sep 07, 2014 7:03 am
Top

Re: Pop top or bubble roof on CT?

Postby aggie79 » Mon Jan 18, 2016 9:41 am

johndep wrote:Not sure exactly what your looking for. Here is an idea. Haulmark Flex 5x8'8", this will be my cargo camper build this winter. gallery/image_page.php?album_id=4224&image_id=138903


Image

munchmeister wrote:Dang, I like that. Never seen one like it. Could be just the ticket. Thanks !! :)
Tom (& Linda)
For build info on our former Silver Beatle teardrop:
Build Thread

93503
User avatar
aggie79
Super Duper Lifetime Member
 
Posts: 5405
Images: 686
Joined: Tue Aug 07, 2007 5:42 pm
Location: Watauga, Texas
Top

Re: Pop top or bubble roof on CT?

Postby johndep » Sun Mar 20, 2016 9:33 pm

Flop low the build of the Haulmark Flex pictured in post above here - viewtopic.php?f=42&t=65659
johndep
Teardrop Inspector
 
Posts: 7
Images: 8
Joined: Sun Jan 17, 2016 5:13 am
Top


Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 1 guest