#4

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: #4

Postby Tom&Shelly » Wed May 01, 2019 7:37 pm

tony.latham wrote:
Tom&Shelly wrote:
tony.latham wrote:But the biggee was cutting the ceiling shelf from the skeletons. With my other builds, I had used a jigsaw. On this one, I used my plunge base and Rockler's router guide so it had my full attention.

I think it took me four passes per skeleton but they are nice and plumb. I'd choose this method again and it was a good warm-up for when I cut the hatch ends.


:beer:

Tony


Nice! What is the bit diameter?

Tom


1/4” spiral upcut. The offcuts should be the correct height for the spar blocking now.

T


Sent from my iPad using Tapatalk


So I was wondering if you are planning on 1/4" ceilings, but I'll be you cut the skeleton with an extra 1/8" for the offcuts, right?

Watching your build is as much fun as doing my own, without all the pesky work! :lol:

Tom
174145 170466 173366
Tom&Shelly
Palladium Donating Member
 
Posts: 2349
Images: 2170
Joined: Tue Sep 05, 2017 3:27 pm
Location: New Mexico

Re: #4

Postby tony.latham » Wed May 01, 2019 7:50 pm

So I was wondering if you are planning on 1/4" ceilings, but I'll be you cut the skeleton with an extra 1/8" for the offcuts, right?


1/8" Baltic, 2" of hard foam (2" spars), and topped off with 1/8" Baltic that will be fiberglassed. :thumbsup:

Heap strong.

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere

Re: #4

Postby bdosborn » Wed May 01, 2019 8:13 pm

tony.latham wrote:So why #4?

Just because... (that's my story for now and I'm sticking to it)


I built my second trailer because the wind blew my pepperoni away. :(

You're off to a fast start, looks like a great build! :thumbsup:

Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5551
Images: 790
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

Re: #4

Postby tony.latham » Fri May 03, 2019 6:02 pm

I built my second trailer because the wind blew my pepperoni away. :(


That'd push me over too. :x

The removable coupler is more or less done. No more wondering how easy it would be to defeat my coupler lock. :frightened:

Image

:thumbsup:

And no, I won't be entering those welds in the county fair.

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: #4

Postby Atomic77 » Fri May 03, 2019 9:11 pm

tony.latham wrote:
I built my second trailer because the wind blew my pepperoni away. :(


That'd push me over too. :x

The removable coupler is more or less done. No more wondering how easy it would be to defeat my coupler lock. :frightened:

Image



And no, I won't be entering those welds in the county fair.

Tony
I curious about your removable coupler. In what situations would you need to remove it? And is it adjustable and if so, why? Interesting concept and nice work!

Sent from my SM-N950U using Tapatalk
Michael

"The Strength is in the Sum of the Parts..."

The Astroliner

Follow The Astroliner Blog Here!

Check out our YouTube video
User avatar
Atomic77
1000 Club
1000 Club
 
Posts: 1463
Images: 309
Joined: Tue Oct 08, 2013 5:29 pm
Location: Fort Wayne Indiana
Top

Re: #4

Postby tony.latham » Fri May 03, 2019 9:43 pm

I curious about your removable coupler. In what situations would you need to remove it? And is it adjustable and if so, why?


We boondock. Sometimes we just camp. Hang out, cook, read and relax but for most of our camps, we leave the teardrop unattended and go explore. We find a hike or something that we want to look at. So our teardrop is all by its lonesome. I've got a coupler lock but I don't think it'd last long with some yahoo and a battery-powered Sawzall.

Image

When we head back to camp, I'm always looking to make sure she's there.

So in the future, I'll just pull the coupler when we set up camp and put it in the Tacoma.

It's not my idea. I think the first time I heard of the concept was from Grant Whipp of Little Bear Teardrops.

It's not adjustable.

:beer:

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: #4

Postby Atomic77 » Fri May 03, 2019 11:08 pm

Great idea. I'll steal it one day. (The idea not the Teardrop.) That's a beautiful picture of your rig. And those welds are darn respectable!

I have multiple locks, but as Dad always said, "Locks are to keep honest people honest." If you really want to steal the Astroliner, I'm sure you could. A little ingenuity, a prybar, a sawsall, a sledge hammer and some time. You would have to work at it though. And even if you defeated multiple locks, there's still the hidden GPS that you couldn't find if you wanted to. It's powered by its own hidden lithium supply that could last for weeks. I know if it moves, even if the wind blows hard enough. Multiple cell phone alarms signal if it leaves its invisible fence. I can see how fast it's going and can locate it visually in an instant, accurate to within 5 feet because it operates on Satellites not Cell towers. At about $3 per month for the SIM card, it's cheap insurance. James Bond spy technology for a Space Age teardrop!

Sent from my SM-N950U using Tapatalk
Michael

"The Strength is in the Sum of the Parts..."

The Astroliner

Follow The Astroliner Blog Here!

Check out our YouTube video
User avatar
Atomic77
1000 Club
1000 Club
 
Posts: 1463
Images: 309
Joined: Tue Oct 08, 2013 5:29 pm
Location: Fort Wayne Indiana
Top

Re: #4

Postby tony.latham » Fri May 03, 2019 11:15 pm

the hidden GPS that you couldn't find...


:thumbsup:
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: #4

Postby Atomic77 » Fri May 03, 2019 11:23 pm

I highly recommend one. You can check it while you're gone and have peace of mind. Ours worked accurately even when we couldn't get cell service. Cool technology.

Sent from my SM-N950U using Tapatalk
Michael

"The Strength is in the Sum of the Parts..."

The Astroliner

Follow The Astroliner Blog Here!

Check out our YouTube video
User avatar
Atomic77
1000 Club
1000 Club
 
Posts: 1463
Images: 309
Joined: Tue Oct 08, 2013 5:29 pm
Location: Fort Wayne Indiana
Top

Re: #4

Postby tony.latham » Sat May 04, 2019 12:32 am

Atomic77 wrote:I highly recommend one. You can check it while you're gone and have peace of mind. Ours worked accurately even when we couldn't get cell service. Cool technology.

Sent from my SM-N950U using Tapatalk


What brand?


Sent from my iPad using Tapatalk
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: #4

Postby Atomic77 » Sat May 04, 2019 9:24 am

tony.latham wrote:
Atomic77 wrote:I highly recommend one. You can check it while you're gone and have peace of mind. Ours worked accurately even when we couldn't get cell service. Cool technology.

Sent from my SM-N950U using Tapatalk


What brand?


Sent from my iPad using Tapatalk
There are several, from what I see they are basically the same internally. Here's a link:

https://get.spytec.com/gl300-buy-now/?c ... ycQAvD_BwE

Sent from my SM-N950U using Tapatalk
Michael

"The Strength is in the Sum of the Parts..."

The Astroliner

Follow The Astroliner Blog Here!

Check out our YouTube video
User avatar
Atomic77
1000 Club
1000 Club
 
Posts: 1463
Images: 309
Joined: Tue Oct 08, 2013 5:29 pm
Location: Fort Wayne Indiana
Top

Re: #4

Postby bdosborn » Sat May 04, 2019 9:37 am

Atomic77 wrote:There are several, from what I see they are basically the same internally. Here's a link:

https://get.spytec.com/gl300-buy-now/?c ... ycQAvD_BwE


I like the idea but it says $25/month when I look at it.

Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5551
Images: 790
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

Re: #4

Postby Atomic77 » Sat May 04, 2019 9:41 am

bdosborn wrote:
Atomic77 wrote:There are several, from what I see they are basically the same internally. Here's a link:

https://get.spytec.com/gl300-buy-now/?c ... ycQAvD_BwE


I like the idea but it says $25/month when I look at it.

Bruce
I got mine on Ebay but it's no longer available from what I see. But there are a ton of them. I got mine without a SIM card and bought a card through US Mobile. $3 a month, no contract.

Sent from my SM-N950U using Tapatalk
Michael

"The Strength is in the Sum of the Parts..."

The Astroliner

Follow The Astroliner Blog Here!

Check out our YouTube video
User avatar
Atomic77
1000 Club
1000 Club
 
Posts: 1463
Images: 309
Joined: Tue Oct 08, 2013 5:29 pm
Location: Fort Wayne Indiana
Top

Re: #4

Postby tony.latham » Thu May 16, 2019 9:13 pm

I've been busy chasing other rabbit holes lately but have managed to get a few more things done on the chassis.

Image

That vertical receiver is for an over-the-tongue-box bike rack down the road.

When I cut the axle order with Dexter, they said three weeks. It's now looking like seven. (It got lost in Georgia). Plan A was to get the chassis done and moved out of the shop. So maybe next week I can get the axle installed, make some room, and get cooking on the walls.

:frightened:

Tony
User avatar
tony.latham
Gold Donating Member
 
Posts: 7011
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: #4

Postby bdosborn » Fri May 17, 2019 12:51 pm

tony.latham wrote:That vertical receiver is for an over-the-tongue-box bike rack down the road.


Hmm, I might have to steal that idea. :thumbsup:

Bruce
2009 6.5'X11' TTT - Boxcar
All it takes is a speck of faith and a few kilowatts of sweat and grace.
Image
Boxcar Build
aVANger Build
User avatar
bdosborn
Donating Member
 
Posts: 5551
Images: 790
Joined: Wed May 05, 2004 11:10 pm
Location: CO, Littleton
Top

PreviousNext

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 4 guests