I am slowly completing the interior. I finished more storage over both the pass and driver's sides. Nothing interesting there.
I had been putting off the counter tops for the last couple of days due to indecision. What should they be made of? At 8 square feet almost anything is affordable. In the end I went with some flooring I had on hand. It was some flooring Lowes was unloading cheap months ago. One box will be enough to cover both interior counters and the galley. I didn't use any plywood under them and instead only used the 1x2 edges of the counters. They were made out of real wood in the same fashion as plywood and they interlocked. I glued them together where they locked and also glued them to the 1x2. They still need some edging.
Once the glue dried I was able to cut the hole for the sink and faucet.
And finish the fronts for both cabinets.
More wiring looms..........
Storage over bed (pass side)
Storage over bed (driver side)
Counter under const.
Sink